Large number of association failures on one access point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Large number of association failures on one access point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Large number of association failures on one access point
Large number of association failures on one access point
2023-12-29 08:42:06 - last edited 2024-01-02 06:10:26
Model: EAP610  
Hardware Version: V2
Firmware Version: 1.1.4 Build 20230922 Rel. 68311

I have one access that reports quite a lot of association failures, around 65 in the last 12 hours.  A different access point had 1 association failure, so 66 in total on my network.

 

Looking through the event log I can see a lot of these

 

[Failed]XXXXXX | XXXXXXX failed to connected to main bedroom with SSID "XXXXXXXXX" on channel 48 because the Association times out.(1 time in a minute)

 

Should this amount of association failures be a cause for concern?  Especially that 99% of the failures are on one access point.

 

If so, how can I debug this further?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Large number of association failures on one access point-Solution
2023-12-29 17:01:08 - last edited 2024-01-02 06:10:26

  @snowch 

 

These are typically related to poor signal conditions or high noise/interference in the local area.  Short of trying a different channel or adding more APs, not sure what you can do here.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Large number of association failures on one access point-Solution
2023-12-29 17:01:08 - last edited 2024-01-02 06:10:26

  @snowch 

 

These are typically related to poor signal conditions or high noise/interference in the local area.  Short of trying a different channel or adding more APs, not sure what you can do here.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  1  
  1  
#2
Options
Re:Large number of association failures on one access point
2023-12-29 22:47:04
ok, thank you for the response!
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 410

Replies: 2

Related Articles