Business Community > All Threads > DPI is enabled but Application Analytics isn't populating
< All Threads

DPI is enabled but Application Analytics isn't populating

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

DPI is enabled but Application Analytics isn't populating

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DPI is enabled but Application Analytics isn't populating
DPI is enabled but Application Analytics isn't populating
2023-12-08 16:09:13 - last edited 2024-01-31 02:12:30
Model: Omada Software Controller (Windows)  
Hardware Version: V1
Firmware Version: 5.13.22

I have enabled DPI and setup a rule, application filter of networks (Screenshots coming) and prior to created a rule the application analytics (logs) were populated but now they are not:

 

 

DPI looks like this:

 

As you see I have a restriction created that uses a filter "Torrents" that contains all the P2P things you have listed in the applications. Is that causing DPI not to log everything? It logged for the first few days and then when I added the torrents restriction it stopped logging anything.

 

Thanks!

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:DPI is enabled but Application Analytics isn't populating-Solution
2024-01-31 02:12:24 - last edited 2024-01-31 02:12:30

Hi All,

 

Starting from Omada Controller v5.9, the controller needs to use port TCP 29815 to receive Device Info, Packet Capture Files, and DPI Application Statistic Data from the Omada devices. Please confirm that the firewall/anti-virus software doesn't block port 29815. The related Knowledge Base article has been updated, please refer here.

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  3  
  3  
#12
Options
14 Reply
Re:DPI is enabled but Application Analytics isn't populating
2023-12-08 20:45:03

  @OrangeStreet 

 

I had this happen one time... I had to reboot the router and controller.  It worked.  I assumed it was a fluke.  Maybe it isnt.  

I can not teach anyone anything - I can only make them think - Socrates
  0  
  0  
#2
Options
Re:DPI is enabled but Application Analytics isn't populating
2023-12-08 21:51:10

  @KimcheeGUN I'll give that a shot off hours when I can. Yuck if that works :)

  0  
  0  
#3
Options
Re:DPI is enabled but Application Analytics isn't populating
2023-12-18 23:23:45

 

Model Omada SW: 5.13.22

Router ER7206 v1.0 Firmware 1.4.0 Build 20231114 Rel.36220

 

Hi, thanks for the recomendation but it diden't work. After reboot the controller and router the Application Analytics isn't populating yet.

 

anyone have another tip?

  0  
  0  
#4
Options
Re:DPI is enabled but Application Analytics isn't populating
2023-12-19 09:45:47

Hi @OrangeStreet,

 

According to the current date selection,  you can only see the related-traffic on 8th Dec. Please adjust the date to see if the traffic statistics in the past few days can be normal shown?
Is it set to monitor bittorrent traffic only?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
Re:DPI is enabled but Application Analytics isn't populating
2023-12-29 11:53:45

I have the exact same issue.

 

Gateway: ER707-M2 v1 (firmware 1.2.0)

Software Controller: 5.13.22 (Linux, running in docker using https://hub.docker.com/r/mbentley/omada-controller/tags)

 

The option is enabled in settings for over two days:

 

But nothing is being populated in Application Analytics (I've tried changing the date range):

  0  
  0  
#6
Options
Re:DPI is enabled but Application Analytics isn't populating
2024-01-29 09:56:13

Hi @colkilgore @OrangeStreet 

Thanks for posting in our business forum.

colkilgore wrote

I have the exact same issue.

 

Gateway: ER707-M2 v1 (firmware 1.2.0)

Software Controller: 5.13.22 (Linux, running in docker using https://hub.docker.com/r/mbentley/omada-controller/tags)

 

The option is enabled in settings for over two days:

 

 

But nothing is being populated in Application Analytics (I've tried changing the date range):

 

How do you manage the system? Do you have a diagram of your network?

Do you have a NAT between the router and the controller? If yes, how do you port forward? Is 29815 open?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#7
Options
Re:DPI is enabled but Application Analytics isn't populating
2024-01-29 20:04:18

  @Clive_A After a reboot of the controller things came back - it would seem there is something that gets fixed when you do that.

  0  
  0  
#8
Options
Re:DPI is enabled but Application Analytics isn't populating
2024-01-30 01:32:42

Hi @OrangeStreet 

Thanks for posting in our business forum.

OrangeStreet wrote

  @Clive_A After a reboot of the controller things came back - it would seem there is something that gets fixed when you do that.

Reboot would reboot the services and re-sync the config. That might be a problem during the config sync.

 

Linux-based server, if sometimes the service does not boot up properly, you either enter SSH and run down and up. Or reboot the system.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#9
Options
Re:DPI is enabled but Application Analytics isn't populating
2024-01-30 03:08:12

  @Clive_A In my case I'm running the windows software controller

  0  
  0  
#10
Options
Re:DPI is enabled but Application Analytics isn't populating
2024-01-30 21:35:45

Just posting that I am having the same issue - DPI is enabled but analytics is not populating.  Using docker on a Mac for the contoller.

  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 3033

Replies: 14

Related Articles
Wrong logo of accedo in Application Analytics (DPI)
359 1
Feautre Application Analytics
1272 1
Omada Controller Application Control
167 0
I blocked the application with the dpi function. PCs are not blocked.
106 0
When enabled (or disable) the option "Application Optimized Routing"
12709 0
oc200 v1 Dpi Help
1144 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.