ER605 V2 Firmware V2_2.2.2 Build 20231017
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.ER605 V2 Firmware V2_2.2.2 Build 20231017
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Kabello
Thanks for posting in our business forum.
Official release. It's pushed to everyone if you use Controller. And it's available on the official website. What's wrong? Why do you say it is not released to everybody?
Update:
This 2.2.2 is not gonna be pushed via the cloud. It is one of the officials. But not gonna be pushed by the controller. If you need to update to this version, please manually update it. Next official firmware will be released and pushed normally.
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
Kabello wrote
When I said “this version has not been released to everyone” I meant that it should automatically appear in the Controller to update.
I had to update manually, because even though I clicked on “check for update”, it didn’t show any updates.
The update should appear automatically, right?
Thanks
OK. Got the confirmation from the senior engineer that this version is one of the officials. But it is not gonna be pushed via the cloud. This one is kinda special.
There will be a new beta released later today. I'll pin it in the router section later. Estimate this one will be pushed via the cloud to users within the next two weeks if nothing goes wrong with it.
- Copy Link
- Report Inappropriate Content
Hi @Kabello
Thanks for posting in our business forum.
Official release. It's pushed to everyone if you use Controller. And it's available on the official website. What's wrong? Why do you say it is not released to everybody?
Update:
This 2.2.2 is not gonna be pushed via the cloud. It is one of the officials. But not gonna be pushed by the controller. If you need to update to this version, please manually update it. Next official firmware will be released and pushed normally.
- Copy Link
- Report Inappropriate Content
@Clive_A After I install the update and reboot the router the beta background screen shows "confidential Only for Test". I have tried reinstalling the old firmware V2: 2.1.2 and then updating again to 2.2.2 , but the screen still returns. I even did a hard reset with the reset button and then upgraded again but the screen still returns. Any way to fix this. Thanks.
- Copy Link
- Report Inappropriate Content
When I said “this version has not been released to everyone” I meant that it should automatically appear in the Controller to update.
I had to update manually, because even though I clicked on “check for update”, it didn’t show any updates.
The update should appear automatically, right?
Thanks
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @hollidayjr
Thanks for posting in our business forum.
hollidayjr wrote
@Clive_A After I install the update and reboot the router the beta background screen shows "confidential Only for Test". I have tried reinstalling the old firmware V2: 2.1.2 and then updating again to 2.2.2 , but the screen still returns. I even did a hard reset with the reset button and then upgraded again but the screen still returns. Any way to fix this. Thanks.
Clear your browser cache and it should fix the watermark on it.
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
Kabello wrote
When I said “this version has not been released to everyone” I meant that it should automatically appear in the Controller to update.
I had to update manually, because even though I clicked on “check for update”, it didn’t show any updates.
The update should appear automatically, right?
Thanks
OK. Got the confirmation from the senior engineer that this version is one of the officials. But it is not gonna be pushed via the cloud. This one is kinda special.
There will be a new beta released later today. I'll pin it in the router section later. Estimate this one will be pushed via the cloud to users within the next two weeks if nothing goes wrong with it.
- Copy Link
- Report Inappropriate Content
@Clive_A Fixed it-thank you.
Clive_A wrote
Hi @hollidayjr
Thanks for posting in our business forum.
hollidayjr wrote
@Clive_A After I install the update and reboot the router the beta background screen shows "confidential Only for Test". I have tried reinstalling the old firmware V2: 2.1.2 and then updating again to 2.2.2 , but the screen still returns. I even did a hard reset with the reset button and then upgraded again but the screen still returns. Any way to fix this. Thanks.
Clear your browser cache and it should fix the watermark on it.
- Copy Link
- Report Inappropriate Content
@Clive_A i recently updated the ER605 and not able to access the router any more - all the configurations are intact but i get unsuported browser as soon as i type the router IP to browse the interface - this is annowing as i have lost control of the router - called the technical support and they could hardly help with any resolution
can you pls let us know what needs to be done
thanking in advance
- Copy Link
- Report Inappropriate Content
Hi,
One should not upgrade to 2.2.2 ; unless you a have a test environment or a homelab and have time to waste to recover from abnormal behaviour.
To my experience, 2.2.2 is broken ; please see détails in my other post : https://community.tp-link.com/en/business/forum/topic/634790?replyId=1270910
Regards.
- Copy Link
- Report Inappropriate Content
Hi @Palz
Thanks for posting in our business forum.
@Clive_A i recently updated the ER605 and not able to access the router any more - all the configurations are intact but i get unsuported browser as soon as i type the router IP to browse the interface - this is annowing as i have lost control of the router - called the technical support and they could hardly help with any resolution
can you pls let us know what needs to be done
thanking in advance
It is quite common to see an Unsupported Browser if you just updated the firmware.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1657
Replies: 11
Voters 0
No one has voted for it yet.