Logs failed to send
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi. Since upgrading the firmware of my OC200 to 1.26.3 Build 20230906 Rel.36269, logs will no longer send. I have tried 3 different SMTP servers and none work. It just comes back with a generic error:
"Failed to send the email to the specified recipient"
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello @Cozz,
May I know whether this feature started to be not functional after the firmware upgrades?
Did you receive the Test Email when you used this email address to set it?
Could you use Gmail/Outlook to test again?
- Copy Link
- Report Inappropriate Content
Hi Hank. I'm sorry, I don't remember how long after the upgrade it started to fail. I have tried the test email and did not receive it.
I have tried Google, Outlook & iCloud and all fail. All that I can see in logs is:
[Failed]The controller failed to mail global logs to <email address> automatically.
- Copy Link
- Report Inappropriate Content
Hi @Cozz,
May I know from which firmware version was the controller upgraded to 5.12?
Please check whether the controller can access the Internet normally. If you have the backup files of the original firmware, you may downgrade to the original version to test if the SMTP server can be set successfully. We just need to confirm if this issue start to occur after the firmware upgraded.
- Copy Link
- Report Inappropriate Content
@Hank21 Hi Hank. I did not take note of the previous firmware, however it was whatever was the latest version for a V2 OC200. I can confirm that the logs were sending successfully prior to the upgrade to the current firmware. It was only after the upgrade did the logs stop sending; there was no change in any setting since the upgrade with regards to the SMPT settings etc.
- Copy Link
- Report Inappropriate Content
Hello @Cozz,
This issue has been reported to the engineer for further investigation. I'll try to provide an update when there's progress.
- Copy Link
- Report Inappropriate Content
Hi @Cozz,
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID231036789, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello!
I have the same problem.
Any news on this?
Controller-Modell: OC300 1.0
Controller-Version: 5.13.30.20
Firmware-Version: 1.22.4 Build 20240304Rel.59252
Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1855
Replies: 10
Voters 0
No one has voted for it yet.