Hi there,

Could anyone please pass on any suggestions on a little issue we are facing with an OC200 Controller and EAP225 devices?

We've two sites. Unfortunately, one of the site (physical) controllers failed, and the quickest/easiest (so we thought) way to move forward was to migrate the site to the other controller (both physical sites are connected with a VPN tunnel). We followed it through, and only 1 out of 10 APs have connected to the new controller. 

All EAP225s run firmware version 5.0.9 and are set up with static IP addresses. 8 devices show disconnected, and 1 shows Isolated. Now I'd be a little less confused if all have done the same thing.

All APs are pingable both locally and remotely, and we can access to webpage/login page (can't you log into these once they're connected to the controller?).

Any ideas please?

Many thanks

Andy