Business Community > All Threads > Need help configuring ER605
< All Threads

Need help configuring ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Need help configuring ER605

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Need help configuring ER605
Need help configuring ER605
2023-08-08 16:25:28 - last edited 2023-08-08 19:39:55
Tags: #WAN Setup
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version:

I purchased the ER605 in order to expand the number of LAN ports of my main router (ASUS AXE11000). I configured it in the standard manner, i.e. connected its WAN port to one of my my main router's LAN ports, dedicated IP addres (DHCP) etc. Everythig works fine except that I cannot access the ER605's Web interface from the WAN side, nor can I SSH into any of the ER605's LAN clients. Basically the ER605 LAN is invisible from the WAN side.

 

What am I doing wrong? I figured that at the very least I should be able to access its Web interface from the WAN side ...

 

What would be the best/most elegant way to configure the ER506 for the use case described above?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Need help configuring ER605-Solution
2023-08-08 19:11:39 - last edited 2023-08-08 19:39:55

  @RedeemerOfSouls 

 

Return the ER605 and buy a basic 5 or 8 port ethernet switch instead (like the $25 SG108 device).

 

What you have done is create a second level of NAT'ing, forcing everything on the LAN side of the ER605 to be accessed via port-forwarding through the IP assigned by the ASUS to the ER605's WAN port.

 

If you don't want to return it, you could configure it as 1WAN/4LAN, ignore the WAN, connect 1 LAN port to your ASUS, disable DHCP on the LAN subnet of the ER605 but that would only buy you 2 'extra' ports overall...not very efficient.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Need help configuring ER605-Solution
2023-08-08 19:11:39 - last edited 2023-08-08 19:39:55

  @RedeemerOfSouls 

 

Return the ER605 and buy a basic 5 or 8 port ethernet switch instead (like the $25 SG108 device).

 

What you have done is create a second level of NAT'ing, forcing everything on the LAN side of the ER605 to be accessed via port-forwarding through the IP assigned by the ASUS to the ER605's WAN port.

 

If you don't want to return it, you could configure it as 1WAN/4LAN, ignore the WAN, connect 1 LAN port to your ASUS, disable DHCP on the LAN subnet of the ER605 but that would only buy you 2 'extra' ports overall...not very efficient.

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  1  
  1  
#2
Options
Re:Need help configuring ER605
2023-08-08 19:42:10

  @d0ugmac1, done, thank you! I went for the SG108, as you suggested. As for the ER605, I can't return it anymore, but I am sure I can put it to good use some other way.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 675

Replies: 2

Tags

WAN Setup
Related Articles
need help with configuring ER605
1345 0
Do I need an ER605?
1012 0
Need help configuring VPN
488 1
Configuring IPv6 on ER605
2235 0
Need help with ER605 connecting to Greenlight ISP
231 0
Help configuring client to site IKEv2 VPN on ER605 V2
1122 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.