ER605 V2_2.1.4_Build 20230727 Beta Firmware For Trial (Released on Aug 2nd, 2023)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123...

ER605 V2_2.1.4_Build 20230727 Beta Firmware For Trial (Released on Aug 2nd, 2023)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 V2_2.1.4_Build 20230727 Beta Firmware For Trial (Released on Aug 2nd, 2023)
ER605 V2_2.1.4_Build 20230727 Beta Firmware For Trial (Released on Aug 2nd, 2023)
2023-07-21 01:08:06 - last edited 2023-10-25 10:02:55

This Article Applies to:  ER605 v2 / v2.6_2.1.4_20230720 (Beta)  | Fully adapted to Omada SDN Controller v5.11

Update as of Aug 2, 2023:

 

Thank you all for your valuable feedback on the ER605 2.1.4_20230720(Beta)!

 

Update the Beta firmware of ER605, which now includes the issue fixed that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.

 

ER605_V2_2.1.4_Build20230727 (Beta)

Notes:

(1) The above firmware is applied to ER605 V2 and V2.60.

(2) Your device’s configuration won’t be lost after upgrading.

(3) The above firmware is fully adapted to Omada SDN Controller 5.11.

 

 

Hello Everyone,

 

This release is mainly to fix some issues based on the ER605 V2 2.2.0 official firmware. Please check the following release notes for more about the fixes.

 

The Purpose of the Beta Firmware

 

We hope to offer you with a chance to experience the new features added in the Controller v5.11 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release.

 

Release Notes

 

New Feature/Enhancement

 

1. Add ACL support for IPv6 data.

2. Add support for IPv6 RA (Router Advertisement) configuration for LAN.

3.  Add support for configuring multiple IP addresses on the WAN port.

4. Add support for monitoring session limits in controller mode.

5. Add support for configuring the MSS (Maximum Segment Size) of WAN port.

6. Add support for Gateway Tools in Controller mode:

  • Ping.
  • Traceroute.
  •  Terminal.

7. Add support for the ability to download device info of Gateway in Controller mode.

8. Add support for Location Group in Gateway ACL.

9. Add support for white list of MAC filtering in Controller mode.

10. Add support for tagging same VLAN ID on different WAN port.

11. Increased security of communication between Gateway and Controller.

12. Add support for DNS cache, which can improve domain name resolution speed by handling recent address resolutions locally before sending request to Internet

13. Add support for DH 14 and DH 15 for PFS.

14. Add support for 0.0.0.0/0 IP range of local network when using IPsec IKEv2 for Client-to-Site VPN.

15. Add support for DDNS custom intervals (1~60 minutes).

16. Add support for link-local addresses or unique local addresses of IPv6 DNS on the LAN side.

17. Log Enhancements.

  • Show the source IP address of TCP no-Flag /ping of death attacks.
  • Show the log of link backup switching.
  • Show the log of DDNS update.
  • Logs can be saved when the device is down. You need to short press the reset button within 5s, and after releasing the reset button, the sys light will be on for 3 seconds to indicate that the downtime log is saved successfully.

 

Bug Fixed

 

1. Fix the bug that ICMP type 13 packets cannot be intercepted.
2. Fix the bug that VPN Client cannot access the other side through IPsec when the device act as a PPTP/L2TP/OpenVPN Server and also establishes IPsec VPN with other devices.
3. Fix the bug that VPN client cannot proxy Internet access when VPN IP Pool and LAN IP are in the same network segment.
4. Fix the bug of CPU abnormality caused by enabling more VLAN Interface.
5. Fix the bug of high latency in ISP Load in Controller mode.
6. Fix the bug of frequent reconnection with Omada Controller.
7. Fix the bug that the VLAN configuration of IPTV is affected by the VLAN configuration of WAN port in Controller mode.
8. Fix the bug that the device does not support proxy internet access as Wireguard VPN client.
9. Fix the bug that Port Forwarding does not take effect under multiple WAN ports.

10. Fixed the issue that the Router might become “DISCONNECTED” in the controller after upgrading to firmware 2.2.0. Reported Here.
11. Fixed the issue that new clients might lose Internet when bandwidth control is configured.
12. Fixed the issue that OpenVPN Server no longer works after upgrading to firmware 2.2.0. Reported Here.
13. Fixed the issue that Internet/DNS resolving might not work when using OpenVPN Connect App/Software to connect to the Router’s OpenVPN Server.

14. Fixed the issue that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.

 

Beta Firmware Download

 

Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

 

ER605_v2_2.1.4_Build 20230720 (Beta)

Notes:

(1) The above firmware is applied to ER605 V2 and V2.60.

(2) Your device’s configuration won’t be lost after upgrading.

(3) The above firmware is fully adapted to Omada SDN Controller 5.11.

 

Update as of Aug 2, 2023:

 

Update the Beta firmware of ER605, which now includes the issue fixed that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.

 

ER605_V2_2.1.4_Build20230727 (Beta)

Notes:

(1) The above firmware is applied to ER605 V2 and V2.60.

(2) Your device’s configuration won’t be lost after upgrading.

(3) The above firmware is fully adapted to Omada SDN Controller 5.11.

 

 

Feedback

 

Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:

  • Management mode (Controller or Standalone)
  • Device Model(s) and Hardware
  • Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support.

 

Recommended Threads

 

Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates

Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  3      
  3      
#1
Options
1 Accepted Solution
Re:ER605 V2_2.1.4_Build 20230727 Beta Firmware For Trial (Released on Aug 2nd, 2023)-Solution
2023-08-02 02:14:19 - last edited 2023-08-02 02:15:00

Update as of Aug 2, 2023:

 

Thank you all for your valuable feedback on the ER605 2.1.4_20230720(Beta)!

 

Update the Beta firmware of ER605, which now includes the issue fixed that the ER605 V2 as an OpenVPN client failed to make all the Internet traffic be routed through the VPN tunnel.

 

ER605_V2_2.1.4_Build20230727 (Beta)

Notes:

(1) The above firmware is applied to ER605 V2 and V2.60.

(2) Your device’s configuration won’t be lost after upgrading.

(3) The above firmware is fully adapted to Omada SDN Controller 5.11.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#40
Options
134 Reply
Re:ER605 V2_2.1.4_Build 20230720 Beta Firmware For Trial (Released on July 21st, 2023)
2023-07-21 12:56:27 - last edited 2023-07-21 12:56:52

Many of the new features included in the release notes aren't reflected yet in the 5.9.32 firmware of the Omada Hardware controller. When can we expect the firmware update for the Omada Hardware controller?

  0  
  0  
#2
Options
Re:ER605 V2_2.1.4_Build 20230720 Beta Firmware For Trial (Released on July 21st, 2023)
2023-07-21 23:25:04

  @ceejaybassist 

 

If I upgraded to the original 2.2.0 firmware before it was pulled, is it worth upgrading to this firmware?

  0  
  0  
#3
Options
Re:ER605 V2_2.1.4_Build 20230720 Beta Firmware For Trial (Released on July 21st, 2023)
2023-07-23 01:00:49 - last edited 2023-07-23 01:03:55

All I know is I keep getting my logs filled with

 

ER605 Detected TCP SYN packets attack and dropped 1392 packets.

 

 

And have absolutely no information to go off ........  what it's all about!  All of the new features again in the OC200 don't exist and I am still awaiting one MAJOR function to be added.

 

I want the ability to add custom DNS for FIXED IP's.......  Most DHCP servers are capable of this function, this would be useful to direct certain people out parental filters, the router itself or google/cloud-dns, pi holes, lan cache...... whatever it may be!

 

 

  2  
  2  
#4
Options
Re:ER605 V2_2.1.4_Build 20230720 Beta Firmware For Trial (Released on July 21st, 2023)
2023-07-23 03:24:01
I think you can disable the logs in the omada oc200
  0  
  0  
#5
Options
Re:ER605 V2_2.1.4_Build 20230720 Beta Firmware For Trial (Released on July 21st, 2023)
2023-07-23 06:55:48

  @ceejaybassist Don't think so I got pretty much everything off....... 

  0  
  0  
#6
Options
Re:ER605 V2_2.1.4_Build 20230720 Beta Firmware For Trial (Released on July 21st, 2023)
2023-07-23 15:13:24

Much better

 

- CPU utilisation is much lower and flat at around 3% previously lots of spikes up to 30%

 

- Memory utilisation is also flat

 

- No more connectivity issues so far

 

- Devices with multiple LAN ports now show up as separate connected clients which they did not before this release.

  3  
  3  
#7
Options
Re:ER605 V2_2.1.4_Build 20230720 Beta Firmware For Trial (Released on July 21st, 2023)
2023-07-23 15:53:49

  @Hank21 all 3 lastest firmwares (2.1.3, 2.1.4 and 2.2.0) have problem with connection between VPN clients: OpenVPN client can not connect to l2tp client.

I have to roll back to 2.1.2 firmware.

  0  
  0  
#8
Options
Re:ER605 V2_2.1.4_Build 20230720 Beta Firmware For Trial (Released on July 21st, 2023)
2023-07-24 04:56:12
It'll be good if a "check for update" option is added into the firmware upgrade page which will automatically check for latest update from update server.
  5  
  5  
#9
Options
Re:ER605 V2_2.1.4_Build 20230720 Beta Firmware For Trial (Released on July 21st, 2023)
2023-07-24 07:09:03

Hi @phongtom 

Thanks for posting your issue here.

Can you be specific about the problem?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#10
Options
Re:ER605 V2_2.1.4_Build 20230720 Beta Firmware For Trial (Released on July 21st, 2023)
2023-07-24 07:26:13 - last edited 2023-07-24 07:27:11

  @MrHC1983 

i am using asus and some tplink routers and I don't see this feature available on them. what kind of function is this? 

tbh, I understand that people want to have as many features as possible. but not everyone can be implemented. i work with the dev and support team, I know some may never pass the PM. 

i also use bunches of DNS severs to filter contents and ads. adguards or pi-hole. many have built-in dhcp servers as well. i don't recall there is an option for this either..

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#11
Options