controller version 5.11
We use OC200 with eap 225 devices. We access the internet through 2 types of ssid, one that is accessible via wpa-psk and another one for clients using vouchers. We just upgraded to the latest version. Now half our clients using the voucher portal can no longer access the internet. others have no problem.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi All,
Thanks for reporting this issue to the TP-Link community!
We greatly appreciate such detailed information you provided, I have forwarded this updated issue of OC200 to the engineer for further investigation. For now, please roll back your firmware version to the previous OC200 V5.9. I will keep you updated on any progress.
- Copy Link
- Report Inappropriate Content
Hi All,
A newer 5.12 Beta firmware has been released for trial, please follow the post link below for details.
Omada SDN Controller_V5.12.x (Updated on Aug 21st, 2023)
- Copy Link
- Report Inappropriate Content
Hello @rakrouki,
May I know the firmware version of EAP225?
You may try to Disable the Portal rule and Enable it again for testing, please also try to reboot the controller.
It is suggested to check if the client devices need to put in the Voucher Code again to get Internet Access.
- Copy Link
- Report Inappropriate Content
@rakrouki @Hank21 HI. I HAVE THE SAME PROBLEM AFTER UPGRADE. NONE OF MY VOUCHER CONNECTED CLIENTS ARE WORKING. I TRY REBOOTING THE CONTROLLER, DISABLING AND REENABLING THE PORTAL BUT THE ISSUE PERSIST.
WHEN I TRY TO CONNECT WITH A NEW VOUCHER, IT WILL WORK, BUT WONT WORK ANYMORE ONCE I ROAM TO ANOTHER EAP IN THE NETWORK.
I USE :
- 1 OC200(UN)_V1_1.25.2 Build 20230704
- 1 ER605(UN)_V1_1.2.1 Build 20220512
- 4 EAP225-Outdoor(EU)_V1_5.1.0 Build 20220926
- 1 EAP225-Outdoor(US)_V1_5.1.0 Build 20220926 Rel. 62456
- 1 EAP110-Outdoor(EU) v3.0 5.0.4 Build 20220216 Rel. 57495
- 2 EAP110(EU) v4.0 5.0.4 Build 20220216 Rel. 57495
- Copy Link
- Report Inappropriate Content
Hi All,
Thanks for reporting this issue to the TP-Link community!
We greatly appreciate such detailed information you provided, I have forwarded this updated issue of OC200 to the engineer for further investigation. For now, please roll back your firmware version to the previous OC200 V5.9. I will keep you updated on any progress.
- Copy Link
- Report Inappropriate Content
Hi All,
A newer 5.12 Beta firmware has been released for trial, please follow the post link below for details.
Omada SDN Controller_V5.12.x (Updated on Aug 21st, 2023)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1072
Replies: 4
Voters 0
No one has voted for it yet.