Business Community > All Threads > ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
< All Threads

ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
2023-04-30 19:24:14 - last edited 2023-05-05 12:08:40
Model: Omada Software Controller (Linux)  
Hardware Version: V1
Firmware Version: 5.9.31

ER605 V1 with  1.2.1 Build 20220512 Rel.76748

 

Connected to a Linux controller running the latest software 5.9.31

 

I don't see any of the new changes release in 5.9.31... which leads me to believe V1 is not getting these updated features. 

 

I can't find any documentation to say it is or isn't, so I'm asking here. 

 

(edited details with correct name)

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options-Solution
2023-05-05 08:05:00 - last edited 2023-05-05 12:08:40

Hello @JasonTh, @d0ugmac1 ,

 

ER605 v1 doesn't support DNS over TLS or HTTPS options.

Thank you for your valuable feedback.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#8
Options
12 Reply
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
2023-04-30 20:12:29

  @JasonTh 

 

The controller only shows what a devices firmware is capable of.  Please install the 1.2.3beta version for the ER605v1 and then re-check with your controller.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
2023-04-30 20:32:15 - last edited 2023-04-30 20:34:17

  @d0ugmac1 

 

Thanks for the replay. I've applied 1.2.3 Build 20230413 Rel.55948, but I have yet to see any DNS over TLS or HTTPS appear.

 

Under Site -> Services I have the following:

 

  • DHCP Reservation
  • Dynamic DNS
  • mDNS
  • SNMP
  • UPnP
  • SSH
  • Reboot Schedule
  • PoE Schedule
  • IPTV
  • Upgrade Schedule
  • Export Data

 

Also no additional DHCP options. 

  1  
  1  
#4
Options
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
2023-05-01 03:13:05

  @JasonTh 

 

I'm in the same boat, ER605v1, beta firmware which is missing half the feature the equivalent ER605v2 has...  Could be it's there, but the controller doesn't know what to do with Beta software, of the Beta software is telling the controller it's really 1.2.1, or who really knows what's what. 

 

For now, your shortest path to secure DNS is to fire up a PiHole somewhere...and maybe use that? 

<< Paying it forward, one juicy problem at a time... >>
  1  
  1  
#5
Options
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
2023-05-04 14:24:43

Any official word here from a TP-Link source?

  0  
  0  
#6
Options
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
2023-05-04 14:36:17 - last edited 2023-05-05 12:08:50
Maybe soon, most are just back from a week of holidays.
<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#7
Options
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options-Solution
2023-05-05 08:05:00 - last edited 2023-05-05 12:08:40

Hello @JasonTh, @d0ugmac1 ,

 

ER605 v1 doesn't support DNS over TLS or HTTPS options.

Thank you for your valuable feedback.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#8
Options
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
2023-05-05 12:08:22

  @Hank21 thank you for the confirmation. 
 

A suggestion on your documentation: call out which features are not supported on older  hardware version. 
 

On a side note, why is the v1 still being sold if it's not capable anymore?

  0  
  0  
#9
Options
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
2023-05-05 15:37:08

  @Hank21 where does it state this? That the V1 can't do these features? What else can it not do?

  0  
  0  
#10
Options
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
2023-05-05 16:03:51 - last edited 2023-05-05 16:04:08

How much time do you have?

 

-1:1 NAT in controller mode

-Wireguard

-

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#11
Options
Re: ER-605 V1 with Linux controller 5.9.31 - not seeing any DNS over TLS or HTTPS options
2023-05-05 16:13:54

  @d0ugmac1 Really no wireguard? Despite copious mentions of wireguard being now available?

Jeez, what a carcrash. Such a gap between the capability of the hardware and the omada/ software reality.

  0  
  0  
#12
Options
12

Information

Helpful: 0

Views: 1216

Replies: 12

Related Articles
Omada Controller 5.1.7 for Linux?
1044 0
Instalação Omada Software Controller - Linux CentOS
584 0
backup per script on the software omada controller itself (linux)
366 0
mDns Repeater not working on Controller Version 5.7.4 Linux
858 1
How to install Omada Software Controller on Amazon Linux on AWS (Guide+Script)
3403 5
ER605v2 firmware 2.2.0 disconnects from Linux Controller 5.9.31
471 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.