CPE 510 in Client mode connects and disconnects to CPE 510 in AP mode repeatedly
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Network topology:
ISP--->Router (192.168.0.1) <----->CPE POE<--->CPE 510 v3.0 AP mode (latest firmware) static ip: 192.168.0.254 <----- 150 ft clear LOS ------> CPE 510 v3.2 Client Mode (latest firmware) static ip: 192.168.0.253<-------> CPE POE<--->Workstation LAN port (dynamic IP)
I have previously connected to the AP mode CPE510 with other wireless devices and access the internet. I can see the AP's SSID in the Client CPE510's Pharos control and have it locked to AP, password entered, both CPE510s set to 20/40 Mhz channel, MAXstream not enabled. The Client will connect to the AP for 4-5 seconds at a time, drop the connection, and repeat, over and over. I think I am just needing to adjust IP settings but I am at a loss for how to proceed.
Any help is much appreciated.
