ER605 Port forwarding not Working
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.ER605 Port forwarding not Working
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
Previously i was using TP link Archer C64, C1200, C80 & AX1500 configured as access point to same wired lan and i was able to port forward RDP to a custom port on my Server, able to access it from anywhere (for eg: router lan ip being 192.168.1.1 and port forwarded to 192.168.1.200)
Now due to requirement of multiple Internet for use as primary and backup in case of failure, i have installed ER605 with 3 WANS each being a different IP range
WAN - 192.168.3.1
WAN 1 - 192.168.4.1
WAN 2 - 192.168.5.1
LAN ip range is still the old one as above in range 192.168.1.x
I have already set port forwarding in ER605, and in my broadband routers and also set rule in Firewall - access control to allow incoming connection as per below links
business-forum-topic-573490 & business-forum-topic-516620 & as per user guide for ER605 from TP-link website
https://community.tp-link.com/en/business/forum/topic/573490
https://community.tp-link.com/en/business/forum/topic/516620
i am still unable to access my server PC if i connect internet through my ER605 Device Lan port, and the port 3389 or any custom port are shown as closed but if i connect the Server LAN to my broadband router (Archer C80 or AX1500 or C64), i am able to access my Server using all three different Broadband connection. The port 3389 or any custom port i use is shown open using open port tool from yougetsignal
Same set of Port forwarding rules is set in virtual server in ER605, Archer C80, Archer C64, Archer AC1200, AX1500
kindly help and advise where do i need to check and solve this problem.
PS - i am not using any kind VPN on ER605. all VPN configurations are as default as it came on ER605 as factory default. Not configured anything at all in VPN.
AJAY SHARMA
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @MarcosRL
Thanks for posting in our business forum.
MarcosRL wrote
We don't have a specific time on when it's available as a public release.
If you use Controller, you'll see the notification on the controller to remind you that. In standalone, there is no online sync notification. You may subscribe the official firmware release thread.
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
- Copy Link
- Report Inappropriate Content
Hi @do0zer
Thanks for posting in our business forum.
do0zer wrote
@Clive_A yes 100% after you update the firmware the password does NOT work: you have to do a hard reset to regain access
I've tested 2.1.4 beta and like I suggested above, 2.1.3 beta is no longer under consideration.
Based on my test on 2.1.4 beta, you can access the router with the old password. If you face a problem with the wrong password, you should clear the cache and close all the tabs. Relaunch the browser and try again. I was able to access it after doing this. And I am pretty sure this is a known issue and was explained previously.
Upgrading the old version of firmware to the latest version prompts a username and password error because the new version fixes a replay attack vulnerability and updates the verification mechanism during login (adding a timestamp, which is equivalent to a change in the encrypted content of each login password). However, due to the browser cache, the password will still be verified using the old encryption mode before the upgrade, resulting in login failure. Clearing the browser cache and relaunching your browser can fix this problem.
- Copy Link
- Report Inappropriate Content
Hello! @Clive_A
In version ER605 V2_2.2.2 Official Firmware (Released on Oct 18th, 2023)
Has this problem been fixed?
EDIT:
I saw here that it was fixed, but I updated it but I'm not facing any problems.
9. Fix the bug that Port Forwarding does not take effect under multiple WAN ports.
Has anyone managed to get it to work after the update?
- Copy Link
- Report Inappropriate Content
Hi @MarcosRL
MarcosRL wrote
Hello! @Clive_A
In version ER605 V2_2.2.2 Official Firmware (Released on Oct 18th, 2023)
Has this problem been fixed?
EDIT:
I saw here that it was fixed, but I updated it but I'm not facing any problems.
9. Fix the bug that Port Forwarding does not take effect under multiple WAN ports.
Has anyone managed to get it to work after the update?
What do you need from me? I am confused by your post. Is it resolved or do you need further assistance?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3819
Replies: 14
Voters 0
No one has voted for it yet.