Business Community > All Threads > ER605 - Reset to factory default
< All Threads

ER605 - Reset to factory default

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 - Reset to factory default

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 - Reset to factory default
ER605 - Reset to factory default
2023-02-09 10:12:17 - last edited 2023-02-09 10:13:17
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version:

I made a setting in standalone mode back then, which is not accessible via controller mode (SNMP / Get trusted host IP).

So my idea was to forget the router and re-adopt to get rid of this setting. The manual says forgeting means reseting. So, is it really that easy: forget (=reset to default ?) an re-adopt? Or is there anything to consider?

  0      
 
  0      
 
#1
Options
1 Reply
Re:ER605 - Reset to factory default
2023-02-09 15:33:39

  @nightfever 

 

If the router is currently managed, then 'Forgetting' it via the controller interface will cause it to do a factory default (reset).  It should then re-appear as an available device for adoption and this time around your SNMP command will not get pushed.  

 

Alternatively, if you are NOT managing it with a software controller, you will need to do a the factory default through the web interface, or via the reset button.

 

Either way, that SNMP setting will not be persistent afterwards.

<< Paying it forward, one juicy problem at a time... >>
  2  
  2  
#2
Options

Information

Helpful: 0

Views: 2402

Replies: 1

Related Articles
ER605 Reset
989 0
Factory reset
1243 0
Unable to factory reset or adopt ER605 (V1.6)
3061 0
ER8411 Factory Reset
2737 0
Factory Reset not working using the reset button
4511 0
ER605 stops responding after some days after power reset
1960 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.