Hi,so as part of doing inter vlan routing, i have setup interface gigabitethernet 1/0/2 as a routed port and setup a default route using my routers interface ip address as the next hop for 0.0.0.0/0 ,etc.  My g1/0/2 interface keeps going down, almost daily. i have the routed port connected to the lan port on my pfsense router and somehow when i lose internet connection (which is normal for me...) the routed port seems to also go down and disable a bunch of stuff on vlan1000, its internal vlan, but also disables dhcp filter globally which is very annoying.

I get that dhcp filter is a layer 2 security and this switch is basically "emulating" a layer 3 interface *cuz its using internal vlans* by using the no switchport command and disabling some layer 2 protocols, but is there no way to not have it disable dhcp filter globally? its not even enabled on that port...

here are the logs that i get almost daily:

63

2023-02-07 13:31:32
    
Link Scan
    
level_5
    
  Gi1/0/2 changed state to up.
64    
2023-02-07 13:30:56
    
NETIF
    
level_5
    
  Line protocol on Interface Gi1/0/2, changed state to down.
65    
2023-02-07 13:30:56
    
NDSnoop
    
level_6
    
  Disable ND Snooping function in vlan 1000.
66    
2023-02-07 13:30:56
    
DHCP6Snoop
    
level_6
    
  Disable DHCPv6 Snooping function in vlan 1000.
67    
2023-02-07 13:30:56
    
NDDetec
    
level_6
    
  Disable ND Detection function in vlan 1000.
68    
2023-02-07 13:30:56
    
DHCPF
    
level_6
    
  Disable DHCP Filter successfully.
69    
2023-02-07 13:30:56
    
DHCPL2R
    
level_6
    
  Disable DHCP L2 Relay function in vlan 1000.
70    
2023-02-07 13:30:56
    
DHCP Snooping
    
level_6
    
  Disable DHCP Snooping function in vlan 1000.
71    
2023-02-07 13:30:56
    
ARP&IP
    
level_6
    
  Disable ARP Inspection in VLAN 1000.
72    
2023-02-07 13:30:56
    
FDB
    
level_6
    
  Deleted all Mac address associated with VLAN 1000.
73    
2023-02-07 13:30:56
    
Link Scan
    
level_5
    
  Gi1/0/2 changed state to down.