Business Community > All Threads > Span Tree Protocol setup on TP-Link Switches on 3x CPE 710 + 3x Backup CPE 210
< All Threads

Span Tree Protocol setup on TP-Link Switches on 3x CPE 710 + 3x Backup CPE 210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Span Tree Protocol setup on TP-Link Switches on 3x CPE 710 + 3x Backup CPE 210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Span Tree Protocol setup on TP-Link Switches on 3x CPE 710 + 3x Backup CPE 210
Span Tree Protocol setup on TP-Link Switches on 3x CPE 710 + 3x Backup CPE 210
2022-10-24 10:35:55 - last edited 2022-10-24 14:36:40
Tags: #Outdoor Wi-Fi Solution #Repeater/Bridge Mode
Model: CPE710   T1700G-28TQ   CPE210  
Hardware Version: V3
Firmware Version: 3.0.0

Hi, I have the following problem:
I would like to understand how I can manage my main antennas plus backup ones.
I own from a customer 3x CPE 710 + 3x CPE210, the antennas connect 3x sheds not so far away.
I would like to leave all the antennas active, but obviously doing so creates a network loop which causes me to drop the entire network of my client.
I thought of getting around the problem by manually setting the Span Tree protocol on the ports, as reported in the attached file containing the hypothetical configuration, I have tp-link switches.
It might work?
I would like to use the CPE210s which now the CPE710s do not work properly or do not work.
Can this be an effective method? do you know more?

File:
STP-SMT-ANT.xlsxDownload
  0      
 
  0      
 
#1
Options
2 Reply
Re:Span Tree Protocol setup on TP-Link Switches on 3x CPE 710 + 3x Backup CPE 210
2022-10-25 04:42:06

  @JamesLattanzio 

I have another idea. It seems that you will have CPE710 and CPE210 work at the same time, then why not config LAG?

 

Actually tplink has an example for this usage:

Source

 

  0  
  0  
#2
Options
Re:Span Tree Protocol setup on TP-Link Switches on 3x CPE 710 + 3x Backup CPE 210
2022-10-25 08:24:54
seems like a valid solution, thank you very much for the answer, but the fact remains that they both have to go down to get the other pair to work properly. Source: "If one CPE is down and the other three work fine, the network will still be unavailable. For example, if CPE-A1 is down, Switch-2 will lose connection to Switch-1, since the logic connection between switch 2 and CPE-A2 is still up and the switch may still transfer the data to CPE-A2. ONLY when a pair of CPEs are down at the same time could the LAG strategy use another pair for backup. use CPEs to build up a LAG tunnel may increase the wireless bandwidth but the connection may not stable in some situations."
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 723

Replies: 2

Tags

Outdoor Wi-Fi Solution Repeater/Bridge Mode
Related Articles
Do tp-link switches support remote span?
523 0
3x CPE710 + 3x CPE210 Problems with connection stability and other problems
969 0
China's TP Link Switches
695 0
TP-Link switches..
1079 0
SFP copper interconnect between TP-Link switches
2249 0
Tp link omada more difficult to setup?
411 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.