Business Community > All Threads > [Request] Omada - Capability to have a different PVID on each Gateway LAN port
< All Threads
 
26
Votes

Implemented [Request] Omada - Capability to have a different PVID on each Gateway LAN port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12
 
26
Votes

Implemented [Request] Omada - Capability to have a different PVID on each Gateway LAN port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Implemented[Request] Omada - Capability to have a different PVID on each Gateway LAN port
[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2022-10-16 04:04:42 - last edited 2023-04-25 03:33:07

Add to Omada the ability to have a different PVID on the different LAN configured ports of a gateway

 

This is a feature currently available in ER605/ER7206 Routers when managed in standalone mode, but unavailable in Omada management.

 

This will allow for VLAN and network segregation at the gateway/router level by physical port separation without the need to add a managed switch.  This is an often expected capability when dealing with new users online (this forum and Reddit) of the Omada environment.

#1
Options
1 Accepted Solution
Re:[Request] Omada - Capability to have a different PVID on each Gateway LAN port-Solution
2023-04-25 03:33:04 - last edited 2023-04-25 04:18:05

Hello @JoeSea and other community members,

 

JoeSea wrote

Add to Omada the ability to have a different PVID on the different LAN configured ports of a gateway

 

This is a feature currently available in ER605/ER7206 Routers when managed in standalone mode, but unavailable in Omada management.

 

I'd like to update this feature request here.

 

Omada Software Controller v5.8 and OC200/OC300 Controller v5.9 has added PVID config for Omada Routers.

Please ensure that both your Omada Controller and Router are updated to the firmware adapted to Controller v5.8 or later version.

 

Note:

For OC200/OC300 controller v5.9, you may need to manually upgrade the firmware via local access as it is a major firmware upgrade.

 

FYI, the following router firmware has added support for modifying port PVID in Omada Controller.

ER605 V1_1.2.3_Build 20230413 Beta Firmware For Trial (Released on Apr 14th, 2023)

ER605 V2_2.1.1 Official Firmware (Released on Jan 30th, 2023)

ER7206 V1_1.3.0 Official Firmware (Released on Mar 28th, 2023)

ER7212PC V1_1.0.3 Official Firmware (Released on Mar 21st, 2023)

 

>> Where to configure the PVID?

 

Go to Devices, highlight your router and navigate to Ports in the right panel, then edit the specific port to configure the PVID.  

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
#15
Options
15 Reply
RE:[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2022-11-09 20:12:06
Omada should be more powerful than the standalone feature set
#3
Options
RE:[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2023-01-14 08:43:34

  @kdekorte 

Agree!

 

Would be great to have better control over the LAN ports in the 605 and have it act more as a omada switch

#4
Options
RE:[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2023-01-14 10:26:13

  @MarcelvE 

 

You can set PVID in the latest update on ER605v2 upgrade to 2.1.0

#5
Options
RE:[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2023-01-14 21:59:31

  @shberge Is this in standalone mode, or Omada?

#6
Options
RE:[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2023-01-14 22:03:51

  @JoeSea 

 

Omada, 

 

#7
Options
RE:[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2023-01-14 22:22:37

  @shberge Tha's great! I figured this was coming soon, since I got a notice that this post was tagged as the focal for the change and the original first post was locked.  Are there further settings for adjusting Untagged VLAN on the Port, or is this the only thing (maybe on the LAN or Profile setup pages)?

 

I have a ER7206, so I'll have to wait for this update.

#8
Options
RE:[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2023-01-15 07:07:25

  @JoeSea 

 

The setup is very simple, only PVID no moret than that. 

 

 

#9
Options
Re:[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2023-01-16 09:37:47

I was indeed kind of expecting this to be possible. How else am I going to put a wired device in a specific VLAN?

#10
Options
RE:[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2023-01-18 22:41:19
This feature should be available on the new ER7212PC in the Omada software. The ER7212PC has no stand alone GUI. Many Thanks
Archer MR600 V1 3G/4G ER7212PC v1.0 TL-SG2210P v5.0 4 x EAP653(EU) v1.0
#11
Options
RE:[Request] Omada - Capability to have a different PVID on each Gateway LAN port
2023-03-24 11:58:44
+1 from me!
#12
Options
12

Information

Helpful: 26

Views: 4056

Replies: 17

Voters 22

voter's avatar
voter's avatar
voter's avatar
voter's avatar
+ 18 Voters
Related Request
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.