ISP > Archer AX50 > TP-Link TL-SG1008 switch

                                                                              > VIGI NVR1016H firmware 210825 connected to switch

                                                                              > TP-Link CPE220 v3 (AP mode) using the POE adapter connected to switch

Win10 PC wirelessly connected to AX50 router using TP-Link Archer T3U Plus adapter

The VIGI C340-W is wirelessly connected to the TP-Link CPE220, the VIGI NVR is actually able to see the C340-W and add it to the camera list and I can also see the video feed from the C340-W. I want to access the web UI of the C340-W to adjust some settings but i am unable to because I get the blank white page and the browser just indicates that its waiting for the reply from the C340-W. I used the latest version of FIrefox and also the latest version of Microsoft Edge but still the same problem. I know that you will suggest to isolate the problem by wiring the C340-W to the router or switch but the C340-W is already mounted in a location which is not easily accessable. Another way to isolate is if I connect the C340-W wirelessly to the WIFI signal of my AX50 but i have not done that yet, reason for that is if the CPE220 is somehow blocking https access to the C340-W. My last option would be to reset the C340-W and reconfigure but i don't want to do that yet since it is being used and again its in a location not easily accessable. Any ideas for a solution is welcomed.

Thank you.