Business Community > All Threads > Wifi devices identified as wired
< All Threads

Wifi devices identified as wired

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wifi devices identified as wired

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wifi devices identified as wired
Wifi devices identified as wired
2022-08-23 10:56:59
Tags: #shelly
Model: OC200  
Hardware Version: V1
Firmware Version: 5.4.7

I've got two active VLAN's totallng about 40 to 50 devices at any given time.

 

One of those VLAN's is used specifically for any IoT device, and ever since the v5.3.2, I've observed certain devices are now identified as Wired, when they are Wifi.

These devices are specifically Shelly Door & Window 2 (all of them). I have more Shelly devices, and they are properly identified.

 

I can't understand what happened for this change, and this incorrect identification.

 

Is this a known issue? Can something be done about it ?

 

Omada equipment:

- 1x OC200 v1, with fw 1.18.3 Build 20220715 Rel.56221, running SDN v.5.4.7

- 1x TL-ER7206 v1.0 with fw 1.2.1 Build 20220512 Rel.77113

- 2x TL-SG2210MP v1.0 with fw 1.0.4 Build 20220707 Rel.55528

- 4x EAP620 HD(EU) v1.0 with fw 1.1.0 Build 20211028 Rel. 68287

- 1x EAP610(EU) v1.0 with 1.0.4 Build 20220325 Rel. 58214

 

 

  0      
 
  0      
 
#1
Options
6 Reply
Re:Wifi devices identified as wired
2022-08-24 08:07:15

Dear  @dominguess 

 

May I know these Shelly Door & Window 2 devices are shown to be connected to which Omada product? The Router ER7206 or the switch TL-SG2210MP?

 

Are these Shelly Door & Window 2 devices still working like normal? Or actually has been disconnected from the network?

 

What will happen if you reboot the IoT device? 

 

Thank you for your kindly feedback!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:Wifi devices identified as wired
2022-08-24 12:11:51 - last edited 2022-08-24 12:12:27

The issue isn't specific to IOT devices. I am also seeing the same behavior with a Dell Laptop. TLR605 V1.0 Router on V1.2.1 (official release) TL-SG2008P v1.0 Switch on V1.0.4 Omada Software controller on V5.5.6

OmadaLinux v5.13.10 R605 V1:1.3.0 - Build 20230511 R.51317 SG2008P V1:V1.0.8 Build 20230602 R.73473 SG2008P V3:V3.0.5 Build 20230602 R.73473 3 x EAP245 V3:V5.1.0-Build 20230104 R.79433
  0  
  0  
#3
Options
Re:Wifi devices identified as wired
2022-08-24 12:19:11 - last edited 2022-08-24 12:22:54

  @Hank21,

 

The overall topology is :

  • Omada Router
    • Switch #1
      • OC200
      • EAP #1
      • Switch #2
        • EAP #2
        • EAP #3
        • EAP #4
        • EAP #5

 

The Shelly devices are split between all EAP's.

The devices are connected, and even after a reboot the behavior remains. You can identify the devices as SHD*

 

  0  
  0  
#4
Options
Re:Wifi devices identified as wired
2022-08-24 12:43:52 - last edited 2022-08-24 13:15:25

  @dominguess I've seen this too with different clients.  Just yesterday, my wife's iPhone was listed as wired to my main switch - even though it wasn't even in the house at the time. Here is my system.

 

Edit:  All devices are up-to-date with their firmware.

(1) TL-R605 v1.0 Router/Gateway (1) OC200 v1.0 Controller (1) TL-SG2210P v3.20 POE Switch (2) TL-SG2218 v1.0 POE Switch (3) EAP245 v3.0 Access Point (1) EAP225-Outdoor v1.0 Access Point
  0  
  0  
#5
Options
Re:Wifi devices identified as wired
2022-08-24 12:50:31

So this seems to be a generic bug.

For some reason, some devices are being identified as Wired when they are Wifi.

  0  
  0  
#6
Options
Re:Wifi devices identified as wired
2022-08-25 04:57:39

Dear  @dominguess 


To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. 

The ticket ID is TKID220830280, please check your email box and ensure the support email is well received. Thanks!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#7
Options

Information

Helpful: 0

Views: 828

Replies: 6

Tags

shelly
Related Articles
Identified Weak Ciphers
1171 0
WiFi channel allocation in mesh (wired or non wired)
1777 0
Wired client at eap235
2016 0
[SOLVED] Wireless devices can not print to wired printer
1853 0
Wired VLANs communicating with wifi VLANs setup
906 0
Wireless devices cannot airplay to wired devices
1003 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.