OC200 + EAP245 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OC200 + EAP245 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OC200 + EAP245 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect
OC200 + EAP245 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect
2022-08-20 10:02:22
Tags: #EAP245
Model: OC200  
Hardware Version: V1
Firmware Version: 1.18.3 Build 20220715 Rel.56221

OC200

Hardware version 1.0

Version 5.4.7

Firmware version 1.18.3 Build 20220715 Rel.56221

 

EAP245

Hardware version EAP245(EU) v3.0

Version 5.0.6

Firmware version 5.0.6 Build 20220429 Rel. 44315

 

My issue

I've read different threads on this forum about DHCP reservations not taking effect. I am experiencing the exact same issue, but on different hardware (EAP245). The solution seems to be in this thread but that solution looks to be specific for the ERN products.

 

Question

How should I proceed to get this issue solved for my hardware?

 

 

  0      
  0      
#1
Options
2 Reply
Re:OC200 + EAP245 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect
2022-08-21 01:01:45

  @Frustrating 

 

IPs are handed out by routers, not by OC200's or EAP245's.  Not sure what you are using for a router....but let's start there.

<< Paying it forward, one juicy problem at a time... >>
  0  
  0  
#2
Options
Re:OC200 + EAP245 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect
2022-08-22 08:17:17

  @Frustrating Hi

 

Your router is not a tplink router?

Are you using a tplink switch?

 

On Omada Controller, DHCP Reservation can only take effect when you have an Omada Router

  0  
  0  
#3
Options