Business Community > All Threads > TL-SG105E VLAN Forwarding
< All Threads

TL-SG105E VLAN Forwarding

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG105E VLAN Forwarding

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG105E VLAN Forwarding
TL-SG105E VLAN Forwarding
2022-07-24 20:51:47 - last edited 2022-07-25 04:54:01
Model: TL-SG105E  
Hardware Version: V5
Firmware Version: 1.0

Hi everyone,

sorry for the weid question, but i am a total network newbie and just trying to learn and set things up.

I have a question regarding VLAN forwarding. I have the SG105E connected to our main HPE switch on a port that has two VLANs. The port is configured to use vlan2 if untagged and provide vlan1 for tagged connections.

I want to be able to use vlan1 on port 4 of my SG105E and Ports 2,3 and 5 on vlan2. port 1 being the connection to the main switch.

However whatever settings i make under 802.1Q VLAN is not working. All devices are going to vlan2, including the one on port 4 which should go to vlan1 on the main switch.

Has anyone any tips on how to set this up correctly. or is it simply not possible with this switch?

 

Currently I have it setup as follows:

 

VLAN1: Port 1 Tagged, Port 4 Untagged

VLAN2: Port 1-3, 5 Untagged

  0      
 
  0      
 
#1
Options
4 Reply
Re:TL-SG105E VLAN Forwarding
2022-07-25 06:27:03 - last edited 2022-07-25 06:27:55

  @TriBex Did you check the port 4 PVID settings? Port 4 should be 1 and other ports should be 2

  0  
  0  
#2
Options
Re:TL-SG105E VLAN Forwarding
2022-07-25 11:17:47

  @Somnus No i did not change any settings there since i dont know what a pvid is. As I said, quite new to all this network stuff.

Any advice on how to set it up? I just checked and all ports are set to pvid 1 (seems to be the default)

  0  
  0  
#3
Options
Re:TL-SG105E VLAN Forwarding
2022-07-25 13:07:41

  @TriBex Here is an example and you can see the PVID is very important for untag ports.

  0  
  0  
#4
Options
Re:TL-SG105E VLAN Forwarding
2022-07-25 16:26:35

  @Somnus Thanks for the link, I think I understand the concept for vlans for this switch now.

That being said, I also think I found a bug in the firmware or a misunderstanding in what way vlan works on my side. Apparently it simply is implossible to tag vlan1 on the switch. I created a vlan3 as a test on the switch and with that it works. However if I change it back to a vlan1, it gets send as a untagged frame and therefor ends up in vlan2.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 659

Replies: 4

Related Articles
SG105E, Deco, VLAN, Isolation
238 0
TL-SG105E management vlan
2248 0
TL-SG105E and SNMP
1167 0
tl-sg105e dhcp in vlan config
1323 0
TL-SG105E problem whit vlan
1105 0
TL-SG105E vlan not forwarding through trunk
1015 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.