I am trying to setup an Outdoor Access Point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

I am trying to setup an Outdoor Access Point

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am trying to setup an Outdoor Access Point
I am trying to setup an Outdoor Access Point
2022-07-11 16:15:57 - last edited 2022-07-12 00:42:25
Model: EAP110-Outdoor  
Hardware Version:
Firmware Version:

I did so once already wirelessly--connecting to TP-Link_2.4GHz_xxxxxxxx and loging in as admin.  I changed the SSID, and login info.  And everything worked. But for some reason, it seems to have now lost that info and the SSID has reverted to TP-Link2.4GHz_xxxxxx but now when connect to that and try and reach the setup page vi either tplinkeap.nt or 192.168.1.196, it says I can't connect.  HOW DO I PROCEED FROM HERE???

  0      
  0      
#1
Options
4 Reply
Re:I am trying to setup an Outdoor Access Point
2022-07-12 11:45:40

  @gimley 

 

You can try resetting the EAP firstly, and test again.

If still no help, set a static IP on the PC like 192.168.0.200, then connect the PC----EAP, use the default IP of EAP 192.168.0.254 to login.

You can try to ping 192.168.0.254 on the PC and check whether can ping through.

If can but can not login, turn off the firewall.

Just striving to develop myself while helping others.
  0  
  0  
#2
Options
Re:I am trying to setup an Outdoor Access Point
2022-07-12 12:22:17

 I don't see a way to reset the EAP.  There's a pinhole on the POE adapter, is that how it's done?

  0  
  0  
#3
Options
Re:I am trying to setup an Outdoor Access Point
2022-07-13 04:00:30

  @gimley 

 

Here is a reset hole on the EAP itself, and take off the cover, you will see it beside the Ethernet port.

Use a pin to press it more than 8 sec. IF you see the light changes, then you did that.

Just striving to develop myself while helping others.
  0  
  0  
#4
Options
Re:I am trying to setup an Outdoor Access Point
2022-07-14 13:56:53

I configured it!  The trick was to set a static ip address on the PC I used.  I just wonder why I didn't have to do this the first tim I configured it. It connected right away to tplinkeap.net but now it seems to need an ip address in the same subdomain firdt.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 757

Replies: 4

Related Articles