Business Community > All Threads > DHCP with LAN Ports to TL-SG2210MP switch and EAP-225 no host name to IP address resolution
< All Threads
 
2
Votes

DHCP with LAN Ports to TL-SG2210MP switch and EAP-225 no host name to IP address resolution

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
 
2
Votes

DHCP with LAN Ports to TL-SG2210MP switch and EAP-225 no host name to IP address resolution

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP with LAN Ports to TL-SG2210MP switch and EAP-225 no host name to IP address resolution
DHCP with LAN Ports to TL-SG2210MP switch and EAP-225 no host name to IP address resolution
2022-06-15 22:36:15 - last edited 2022-06-16 05:46:41
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: 1.2.1 Build 20220512 Rel.77113

The Network contains the ER7206 as the Fibre ISP service on a 1G Ethernet SFP/WAN port

DHCP server feeding 4 Copper RJ45 LAN Ports and a TL-SG2210MP PoE Smart switch

 

Wired Clients include:

 

Windows 10 and 11 WS

4 Linux 20.04.4 servers

1 EAP-225 WiFi AP

Polycom VoIP Handset

Grandstream DP-750 DECT VoIP base Station

 

WiFi Clients include:

Gen 2 Nest Thermostat

2 Nest security and smoke alarms

Samsung Smart TV

Intel NUC 7

Cell Phone wifi

Android Device wifi

 

The network performance is 400/400 from the fibre internet and close to that WiFi performance from the EAP-225 The network works well but...

 

The problems are:

The DHCP client list takes hours to fully populate

Hostname to IP Address resolution is non existent

Any attempt to use the Omada Site Software refuses to adopt the "client devices"

 

Where to go from Here?

 

#1
Options
2 Reply
Re:DHCP with LAN Ports to TL-SG2210MP switch and EAP-225 no host name to IP address resolution
2022-06-16 05:48:35

Hi  @Tim-Ryan 

 

To gather feedback from others, I'd like to transfer this thread to the block of "Requests & Suggestions" so that it could be seen by more people.

 

May I have more details about the 3rd request "Any attempt to use the Omada Site Software refuses to adopt the "client devices"? 

An example will be much appreciated.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
#2
Options
Re:DHCP with LAN Ports to TL-SG2210MP switch and EAP-225 no host name to IP address resolution
2022-06-16 18:30:30 - last edited 2022-06-16 18:32:46

When I first got started with Omada I built out OC200, OC300, and Omada SDN LAN's on Windows 10 based workstations, this was 18 months ago. They worked fine. All of these were served by ISP fibre CPE devices that provided the DHCP services to the LAN environment. These were mostly Genexis gigabit fibre CPE's

 

Where I am having problems now are with the TL-ER7206 acting as the Fibre CPE with a 1G BiDi Fibre SFP as the ISP fibre connection, and the TL-ER7206 acting ast the LAN DHCP server.

#3
Options

Information

Helpful: 2

Views: 923

Replies: 2

Voters 2

voter's avatar
voter's avatar
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.