Hi,

 I hvae two EAP265 access poins connected to my home netwrok via ethernet at 1Gbit speeds but I only get just over 100mbps on speed tests.

I have virgin 1Gbit internet conection which I have tested and varefied at the modem.

Modem is ethernet connected via ethernet to the house netwrok central point. (new build house with fully cabled home network). Connection is then connected to a Netgear GS608 gigabit switch which in turn sends the connection to the main rooms of the house. Connection speed at the swtich input face plate and all switch ports is between 950Mbps and 1020Mbps, all tested via harwired laptop. Connection tests completed at wall ports for all rooms with results as per switch, bar one room which returns 100Mpbs, so this one room will need to be investigated (suspect badly or incorrecctly wired face palte).

Custom netwrok SSID's generated on the AP's for both 2.4GHz and 5GHz in order to seperatly test all access points bands and results are poor and dissapointing with the best result being just over 100Mbps and the average around 60Mbps. same test device connected to router also via WIFI returns 600Mbps+ ruling out device issue. 

Both access points show  ETH1 received speed of 1000Mbps - FD so I'm fairly confident the AP's are receiving the full allocated speed but this is just not being broardcast from the AP's

Am I missing somthing here because I purchaded two AP's with WIFI speeds of 450mbps @ 2.4GHz and 1300Mbps @ 5GHz.

Any help would be greatly appriciated.