Business Community > All Threads > TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module
< All Threads

New Arrival TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module

New Arrival TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module

New ArrivalTL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module
TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module
2022-04-18 08:57:53 - last edited 2022-09-19 04:20:50
Tags: #Official

Hi Everyone,

 

We’re excited to announce the official launch of TL-SM5310-T here!

 

TL-SM5310-T is the first 10G BASE-T RJ45 SFP+ Module, which provides superior 10G performance for an easy and quick connection between your SFP+ interface and RJ45 port. It covers up to 30m* at 10 Gbps (UTP cat.6a or above).

A plug-and-play design makes for easy deployment, no technician needed. High-quality metal casing ensures strength and reliability for a long time, maintaining a stable connection in a wide range of environments**.

 

*Data measured in a laboratory environment under specific conditions. The actual transmission distance may vary due to transmission speed or the cable quality and type. 

**It is recommended to place the modules separated by multiple optical transceivers or empty slots. When used in high-temperature environments, additional cooling must be applied.

 

1. Product Overview

 

  • Up to 10Gbps 

    Transfers SFP+ to RJ45 with guaranteed performance and support the data rate of 10Gbps/5Gbps/2.5Gbps/1Gbps/100Mbps

  • Transmit data up to 30m* at 10 Gbps (UTP cat.6a or above)

    Suitable for medium-range transmission between floors

  • Plug and Play

    Work with 10G SFP+ port of Omada gateway/switch without further configuration

  • Support DDM (Voltage and Temperature)

    The voltage and temperature of the module can be read through DDM, which is convenient for monitoring the status of network nodes

  • Hot-Pluggable SFP+ Footprint Features
  • Support TX Disable function
  • Commercial Product Operating Temperature Range: 0-70°C
  • Fully Metallic Enclosure for Low EMI

 

 

2. Application Scenario

 

(1). When you have access switch and aggregation switch in short distance, you may like to use a RJ45 network cable to connect the switches but not deploy the fiber. Therefore, you may need a SFP+ RJ45 module to convert the SFP+ slot to an 10Gbps Ethernet port.

 

(2). Sometimes you only use 1-2 SFP+ slots to connect fiber, and want to to make full use of the other SFP+ slots to connect Ethernet devices. Therefore, a SFP+ RJ45 module will be useful

 

(3). Some AX AP may have SFP+ slot to be compatible with 10Gps. But if the AP is very close to the switch, it will be more convenient to use an Ethernet cable to connect the AP to the switch but not fiber.  SFP+ RJ45 module can help you convert SFP+ slot into Ethernet port.

 

 

3. Comparison

 

We recommend that you use only TP-Link modules on your TP-Link devices.

 

Note:

(1). TL-SM331T does not support the data rate of 10 Mbps or 100 Mbps.TL-SM 5310-T does not support the data rate of 10 Mbps, but supports 100 Mbps / 1 Gbps / 2.5 Gbps / 5 Gbps / 10 Gbps.

(2). When a Gigabit RJ45 SFP module is inserted into a 10 Gbps SFP+ slot, extra configuration may be required.

(3). When the 10G RJ45 SFP+ module is inserted into a 10 Gbps SFP+ slot and the maximum rate of the peer connection port is 5 Gbps, 2.5 Gbps, 1 Gbps, or 100 Mbps, the flow control for the 10 Gbps SFP+ slot needs to be manually enabled.

 

 

4. Recommended Installation

 

The 10G RJ45 SFP+ modules consume more power than optical modules. This may result in higher heat. To avoid overheating, it is recommended to place the modules separated by multiple optical transceivers or empty slots. When used in high temperature environments, additional cooling must be applied.

 

The figures below only show the recommended positioning. The actual number of modules that can be inserted depends on the switch's heat dissipation and
power margin.

 

 

 

For more details, please refer to Quick Installation Guide.

 

 

Q&A:

 

Q1：Does TL-SM5310-T support SFP slot?

   No, not support. TL-SM5310-T only supports the SFP+ slot working in 10G mode.

 

Q2：Does the Ethernet port of TL-SM5310-T support 5G, 2.5G, 1000M, 100M, 10M?

   10G, 5G, 2.5G, 1000M, 100M are supported, but 10M is not supported.

 

Q3：How long is the network cable supported by TL-SM5310-T?

   10GBASE-T: UTP cat.6a or above (max. 30m), Others: cat.5e or above (max. 100m).

 

Q4：Does TL-SM5310-T support hot swap?

Yes, but it’s not recommended to hot-swap TL-SM5310-T without gloves. Because the temperature of the module may exceed 70℃ when the environment temperature is higher than 35℃.

 

Q5：Where can I purchase the TL-SM5310-T from？

Different region may have different sales strategy, you may contact the local agent for the actual arrival and sales status of TL-SM5310-T.

 

 

Related Articles:

The Q&A about the compatibility of the TP-Link SFP modules with the third party devices

Troubleshooting Instruction of SFP/Media Converter

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0      
 
  0      
 
#1
Options
7 Reply
Re:TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module
2023-02-11 19:44:49

  @Hank21 Thank you for the detailed information about TL-SM5310-T. This 10G BASE-T RJ45 SFP+ Module sounds like a great option for those who are looking for an easy and quick way to connect their SFP+ interface and RJ45 port. The plug-and-play design and the ability to transmit data up to 30m at 10 Gbps make it a convenient solution for medium-range transmission. Maintenance Newportnews should keep the recommended installation in mind to avoid overheating and to ensure stable connection.

  1  
  1  
#2
Options
Re:TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module
2023-08-29 13:39:00

 Tnx for this part!

 

I have some questions. At my first costumer with 10G in the network, I want to use a TL-SG3428XPP-M2 switch. A second switch TL-SG3452P is already in use. A server with 10GB ports is planned.

 

We want to use the four SFP slots of the 3428XPP to connect to the given SG3452 switch (with 1GBit), AND to connect to the server (with 10GBit).

The server will be an Fujitsu server RX1330 M5 with an Intel X710-DA2 2x10GbE SFP+.

 

My idea, pls correct me : I would buy 8 peaces of this SM5310, two for the server, two for the SG352P Uplink, and four for the SG3428XPP. All connected with CAT6+ cables instead of fiber cables.

Only problem is the temperature?

Or other solutions better?

  0  
  0  
#4
Options
Re:TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module
2023-08-30 02:35:57

Hi @Andreas_Koelner 

Thanks for posting in our business forum.

Andreas_Koelner wrote

 Tnx for this part!

 

I have some questions. At my first costumer with 10G in the network, I want to use a TL-SG3428XPP-M2 switch. A second switch TL-SG3452P is already in use. A server with 10GB ports is planned.

 

We want to use the four SFP slots of the 3428XPP to connect to the given SG3452 switch (with 1GBit), AND to connect to the server (with 10GBit).

The server will be an Fujitsu server RX1330 M5 with an Intel X710-DA2 2x10GbE SFP+.

 

My idea, pls correct me : I would buy 8 peaces of this SM5310, two for the server, two for the SG352P Uplink, and four for the SG3428XPP. All connected with CAT6+ cables instead of fiber cables.

Only problem is the temperature?

Or other solutions better?

 

If you are not gonna plug all 8 pcs or multiple of SM5310 into the same switch or side by side, you don't need to worry too much about the high temp and its performance throttle.

 

But if you are plugging all 8 pcs into a single switch or multiple side by side, then this is not ideal as the OP has explained with pictures. I would be worried about the 3428XPP with 4 pcs of SFP+ modules. If possible, you want to fix this heat issue and use 4 pcs at the same time, You should consider getting a fan or putting the switch in an AC-temp-controlled room. Maybe with an additional fan to let go of the heat.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#5
Options
Re:TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module
2024-01-02 19:55:53 - last edited 2024-01-02 19:57:51

  @Hank21 

 

This modules run very hot on my switch.

 

I have TL-SG3428X switch, and DDM data shows:

 

SG3428X#show ddm status

Temperature(C) Voltage(V) Bias Current(mA) Tx Power(mW) Tx Power(dBm) Rx Power(mW) Rx Power(dBm) Data Ready Rx Los Tx Fault

Te1/0/25 -- -- -- -- -- -- -- -- -- --

Te1/0/26 -- -- -- -- -- -- -- -- -- --

Te1/0/27 -- -- -- -- -- -- -- -- -- --

Te1/0/28 87.328125 3.229000 0.000000 0.000000 -inf 0.000000 -inf False False False

 

Environment temperature is around 26-27 C. And its idling no traffic on the port.

 

Is it safe to operate these modules around 90 C?

 

I tried these modules on my 3008F and 3016F, temps are similar. Using CAT-8 cable btw.

  1  
  1  
#6
Options
Re:TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module
2024-02-12 18:58:17
yes i would love work these in switchs rooters be a beta tester for tplink
  0  
  0  
#7
Options
TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module
2024-04-04 15:59:14

  @Hank21 

 

[If this isn't the correct forum, please delete and advise where to post my question.]

 

Quick Q:  Is the TL-SM5310-T compatible with the TP-Link ER707-M2 router, in the Port7 SFP slot?

 

Thanks you.

  0  
  0  
#8
Options
TL-SM5310-T, the first 10G BASE-T RJ45 SFP+ Module
2024-04-07 09:05:38

 

SteveHebler wrote

  @Hank21 

 

[If this isn't the correct forum, please delete and advise where to post my question.]

 

Quick Q:  Is the TL-SM5310-T compatible with the TP-Link ER707-M2 router, in the Port7 SFP slot?

 

Thanks you.

Hi @SteveHebler 

No, there is only Gigabit SFP port on ER707-M2 instead of the 10G SFP port, you may consider the Gigabit SFP module.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 3278

Replies: 7

Tags

Official
Related Articles
Searching for 10G BASE-T RJ45 SFP+ Module with 100m
770 0
Do you TL-SM5310-T 10G BASE-T RJ45 SFP+ Module can run in TL-SG3428X at 1GB/s speed
716 0
SFP-to-copper RJ45 module for TL-SG1210P?
1060 0
TL-SG3452X and Ubiquiti UACC-CM-RJ45-MG SFP+ module not working
575 0
Which SFP module to use with TL-SG2210MP
851 0
How i can manage the SFP module on ER7206
684 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.