Series connection of 2 CPE220's
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi All
Can't seem to find configuration diagrams to achieve what I want.
The idea is to increase coverage over a large Museum site using multiple cpe220's.
No internet involved, just local wifi coverage for lights and alarms.
I have an indoor TP-Link Wifi router connected to a PC.
This router has a cat5 cable from one of the ports to an outdoor CPE220 via a poE supply.
The power supply is about 30 meters away from the mast and has only 1 cat5 going to
the first CPE220 on the mast.
All working good sofar.
To cover weak areas, I have mounted additional CPE220's all on the same csid and password
so it will become one large wifi coverage area.
From first CPE220 Lan0 port, I have a cat5 going to second CPE220.
The second CPE220 has poE cable from power supply.
My questions:
1: Does the cat5 from first cpe220 go into the Lan port of the poE supply, or direct into the Lan port of the second CPE220.
2: What mode would you suggest for this to work.
3: If we ignore the cat5 cable from first cpe220, then which
Regards
