Business Community > All Threads > EAP225 outdoor--resetting an individual AP
< All Threads

EAP225 outdoor--resetting an individual AP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP225 outdoor--resetting an individual AP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP225 outdoor--resetting an individual AP
EAP225 outdoor--resetting an individual AP
2022-02-26 17:13:26 - last edited 2022-03-05 22:53:33
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 5.0.7 Build 20211026 Rel. 33125

After I finished all the firmware upgrades on both the controller and the APs, I had to reconfigure everything. Yesterday, I remembered that I was going to assign IPs to each AP rather than use DHCP. This worked fine until I got to the last AP and suffered from "fat finger". I assigned all APs with the 10.1.10.xx scheme. When configuring the last one, I inadvertently assigned it 10.1.102.24. My bad. Now the AP shows us as "Adopting" and is stuck there. Seems with the old Omada interface, I could go in and tell the system to forget individual APs. I cannot find that function in the newest interface.

Now I need to know how to fix the problem. I administer this site remotely. Is there a way I can reset this AP without having to go onsite and physically reset the thing?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:EAP225 outdoor--resetting an individual AP-Solution
2022-03-05 22:53:15 - last edited 2022-03-05 22:53:33

@Somnus Just to let you know, I went onsite yesterday and fixed the problem by logging onto the network after setting my IP on the PC  to match the network that the AP had. As soon as I logged on it told me that the AP had been managed by a controller and would I like to reset it. I said  yes and about a minute later, everything was reset. I was then able to log onto the controller and adopt the AP,

Thanks for your help.

 

Art

Recommended Solution
  0  
  0  
#6
Options
5 Reply
Re:EAP225 outdoor--resetting an individual AP
2022-02-28 12:06:38
On Controller Devices list, choose the EAP and on the right menu, click Config. On the bottom there is Manage Device option and here you can try forget the device. Not sure if it can work for you, since the EAP already lost connection to the controller.
  1  
  1  
#2
Options
Re:EAP225 outdoor--resetting an individual AP
2022-02-28 12:08:34 - last edited 2022-03-05 22:54:20
Another solution, you can set up static IP on your computer like 10.1.102.xxx/24, and login the AP web interface. There will be a reset option on the web login page
  1  
  1  
#3
Options
Re:EAP225 outdoor--resetting an individual AP
2022-02-28 14:47:57

  @Somnus You're right. All I get is a message confirming the MAC address and the model/firmware and how many days of uptime there are.

  0  
  0  
#4
Options
Re:EAP225 outdoor--resetting an individual AP
2022-02-28 14:49:45

  @Somnus For this I probably have to go onsite. Setting my computer to a static IP would no doubt knock me off my own internet connection.

  0  
  0  
#5
Options
Re:EAP225 outdoor--resetting an individual AP-Solution
2022-03-05 22:53:15 - last edited 2022-03-05 22:53:33

@Somnus Just to let you know, I went onsite yesterday and fixed the problem by logging onto the network after setting my IP on the PC  to match the network that the AP had. As soon as I logged on it told me that the AP had been managed by a controller and would I like to reset it. I said  yes and about a minute later, everything was reset. I was then able to log onto the controller and adopt the AP,

Thanks for your help.

 

Art

Recommended Solution
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 965

Replies: 5

Related Articles
eap225-outdoor
638 0
More powerful AP than EAP225-Outdoor?
858 0
EAP225-outdoor as rootAP and another EAP225-outdoor as mesh AP
1118 0
EAP225 & EAP225 outdoor connected to Fritzbox
803 0
mesh with EAP225-Outdoor
1361 0
EAP225-outdoor speed
814 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.