Business Community > All Threads > Mesh Adoption of EAP 225 Outdoor not possible after upgrade to 5.0.30
< All Threads

Mesh Adoption of EAP 225 Outdoor not possible after upgrade to 5.0.30

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Mesh Adoption of EAP 225 Outdoor not possible after upgrade to 5.0.30

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Mesh Adoption of EAP 225 Outdoor not possible after upgrade to 5.0.30
Mesh Adoption of EAP 225 Outdoor not possible after upgrade to 5.0.30
2022-02-03 13:21:55 - last edited 2022-02-07 07:25:55
Model: Omada Software Controller (Linux)  
Hardware Version:
Firmware Version: 5.0.30

Hello,

 

I have the following setup:

- Linux Software Controller

- EAP615-Wall(EU) v1.0 1.0.2 Build 20210823 Rel. 3585

- EAP620 HD(EU) v1.0 1.1.0 Build 20211028 Rel. 68287 (root-mesh-ap)

- EAP225-Outdoor v1.0 - latest FW ("client"-mesh)

 

This worked with controller 4.4.8

 

Now the software controller got upgraded from 4.4.8 to 5.0.30. 

The Mesh-adoption for EAP225 Outdoor does not work anymore. Adoption works via cable - but after unplugging the cable - it will not mesh-link. 

 

Several factory resets of the EAP-225 were done - nothing helps. I also entered the default admin/admin credentials when asked for it. Nothing helps. No mesh possible anymore. 

 

Is this known? What else can I do?

 

br

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Mesh Adoption of EAP 225 Outdoor not possible after upgrade to 5.0.30-Solution
2022-02-07 07:25:50 - last edited 2022-02-07 07:26:22

@wuppi 

fixing the 5g band to the first one did not help, thanks for the idea. 

 

I was fed up and shutdown and re-started everything - that did it. 

 

Well - I believed that choosing the business line of products would avoid the "have you tried turning it off and on" stuff - but this seems to the way to go.

Recommended Solution
  0  
  0  
#6
Options
4 Reply
Re:Mesh Adoption of EAP 225 Outdoor not possible after upgrade to 5.0.30
2022-02-04 06:05:59

@wuppi 

You can try to fix the 5G of EAP620 HD in band 1, then reset your EAP225-Outdoor, put it next to the controller and see if it will show up in the controller interface as wireless, if it will then click adopt.

  0  
  0  
#2
Options
Re:Mesh Adoption of EAP 225 Outdoor not possible after upgrade to 5.0.30
2022-02-04 07:30:53 - last edited 2022-02-04 07:42:54

@Yannie What do you mean by "Fix the 5G" ?

And: it does show up - but adoption fails

  0  
  0  
#4
Options
Re:Mesh Adoption of EAP 225 Outdoor not possible after upgrade to 5.0.30
2022-02-04 11:12:13

@wuppi like this, fix the 5G channel in band1, don't select auto.when you fail to adopt it,any error message ?

  0  
  0  
#5
Options
Re:Mesh Adoption of EAP 225 Outdoor not possible after upgrade to 5.0.30-Solution
2022-02-07 07:25:50 - last edited 2022-02-07 07:26:22

@wuppi 

fixing the 5g band to the first one did not help, thanks for the idea. 

 

I was fed up and shutdown and re-started everything - that did it. 

 

Well - I believed that choosing the business line of products would avoid the "have you tried turning it off and on" stuff - but this seems to the way to go.

Recommended Solution
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1132

Replies: 6

Related Articles
EAP 225-Outdoor mesh issue
605 0
Omada (225-Outdoor) Mesh Adoption
717 0
EAP Adoption Limit per Site (Issue)
563 0
EAP 225 outdoor mesh network
422 0
EAP 225, No SSID after adoption
859 0
Cannot connect 3rd "EAP-225 Outdoor" to my Mesh Network
1653 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.