DHCP Relay on Omada
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Omada version is 5.1.30
I have and ER605, with a SP2008P atttached.
I have a DHCP server set up on Windows, and each of the subnets matchihing the VLANS has been set up. this server is on VLAN 1
I have defined 4 new VLANs, 10, 20, 30m 50
Existing VLAN is 1
In the VLAN definition, I made sure to select the port where the SP2008P is attached.
I also defined the legal DHCP servers.
I then enable the port on the Sp2008P that I have a test PC attached to, and selcted the VLAN 30 VLAN
1. When I start the connection with DHCP on the test workstation, it does not get an address.
2. If I define a static IP (192.168.30.100) it works
I would expect, in defining the legal DHCP servers, that it would set up the relay from those servers to the subnet.
What am I missing?
