Business Community > All Threads > TP-Link EAP225-Outdoor not adopting
< All Threads

TP-Link EAP225-Outdoor not adopting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link EAP225-Outdoor not adopting

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link EAP225-Outdoor not adopting
TP-Link EAP225-Outdoor not adopting
2022-01-12 21:10:30 - last edited 2022-01-12 22:19:43
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 5.0.7

I upgraded the firmware to 5.0.7 and I could not ADOTP anymore to the OC300 Controller (Controller Version: 5.0.29 Firmware: 1.7.0 Build 20211215 Rel.61008)
I tried to factory reset the EAP-225 and did not help. So I select "FORGET" device to see if it would re-discover, but this made it worst because now it cannot discover the device or the device cannot discover the controller.

Is there a way to un-forget the device or any advice to get this working again.

Thanks

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TP-Link EAP225-Outdoor not adopting-Solution
2022-01-12 22:12:30 - last edited 2022-01-12 22:19:43

@CoolNet 

 

How is your topology? OC300 and EAP225-outdoor are in the same subnet or L3?

If L3, you can log in in the resetted EAP and configure the inform URL with PUBLIC IP/URL of your OC300 in order to discover againg the controller.

 

BR

Recommended Solution
  1  
  1  
#4
Options
4 Reply
Re:TP-Link EAP225-Outdoor not adopting
2022-01-12 21:50:02

@CoolNet 

 

Try to check the release notes if are useful:

 

With this firmware, port 29814 instead of ports 29811/29812/29813 is used when EAP is managed by Omada SDN Controller v5

 

It means that if you not are in the same network/subnet, you have to open the new TCP port 29814 to discover and adopt again with this new fw.

 

Best Regards

  0  
  0  
#2
Options
Re:TP-Link EAP225-Outdoor not adopting
2022-01-12 22:07:57
Thanks, I missed that. I did open the the new port in my firewall. However, I reset the EAP-225 to factory settings but still not showing up in the "Devices" list. I did select "FORGET" prior. Is this something else I need to do in the controller to bring that device back ? meaning un-forget. Thanks
  0  
  0  
#3
Options
Re:TP-Link EAP225-Outdoor not adopting-Solution
2022-01-12 22:12:30 - last edited 2022-01-12 22:19:43

@CoolNet 

 

How is your topology? OC300 and EAP225-outdoor are in the same subnet or L3?

If L3, you can log in in the resetted EAP and configure the inform URL with PUBLIC IP/URL of your OC300 in order to discover againg the controller.

 

BR

Recommended Solution
  1  
  1  
#4
Options
Re:TP-Link EAP225-Outdoor not adopting
2022-01-12 22:19:34 - last edited 2022-01-12 22:19:42
That worked. THANKS
  3  
  3  
#5
Options

Information

Helpful: 0

Views: 1350

Replies: 4

Related Articles
TP link EAP 225 outdoor
947 0
eap225 adopting loop, but working
2046 0
eap225-outdoor
638 0
eap225 not adopting
1286 0
EAP225 & EAP225 outdoor connected to Fritzbox
803 0
mesh with EAP225-Outdoor
1361 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.