Business Community > All Threads > EAP245 & ER605 slow throughput?
< All Threads

EAP245 & ER605 slow throughput?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP245 & ER605 slow throughput?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP245 & ER605 slow throughput?
EAP245 & ER605 slow throughput?
2022-01-09 21:28:39
Model: EAP245  
Hardware Version:
Firmware Version:

Hello there,

 

I have a couple of EAP245 connected to an OC200 controller and a ER605 router.

 

I am experiencing slow wireless throughput speeds. When I unplug the ethernet from the back of the EAP245 and plug it into my computer I get ~800mbps on speedtest (lovely). When I plug it back into the EAP245 I am seeing a TX Rate of 1.3Gbps (lovely), but when I then use speedtest wirelessly I am looking at 10 or 20mbps max (not so lovely).

 

I am new to the Omada setup, so hopefully i'm missing something simple!

 

Many Thanks,

Miles

  0      
 
  0      
 
#1
Options
5 Reply
Re:EAP245 & ER605 slow throughput?
2022-01-09 21:56:30

I had "No Acknowledgement" in the advanced settings turned on. I switched that off, and it seems to be much much better! ~400mbps

 

In that section I only have WMM enabled, should I have the "Unscheduled Automatic Power Save Delivery" turned on too?

  0  
  0  
#2
Options
Re:EAP245 & ER605 slow throughput?
2022-01-10 07:43:18

Dear @MilesIsHere ,

 

MilesIsHere wrote

I had "No Acknowledgement" in the advanced settings turned on. I switched that off, and it seems to be much much better! ~400mbps

In that section I only have WMM enabled, should I have the "Unscheduled Automatic Power Save Delivery" turned on too?

 

It is recommended that you turn off advanced features including Qos etc. before running the speed test.

You can also change the channel and the channel width of this EAP to have a try.
For the 2.4G, the channel is 1, the channel width is 20 Mhz.
For the 5G, the channel is 36, channel width is 20Mhz.
 
In addition, you can refer to this link for the trouble shooting:
Troubleshooting of Wireless Issues for Omada EAP

 

Best Regards!

 

 

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#3
Options
Re:EAP245 & ER605 slow throughput?
2022-01-11 22:13:42

@MilesIsHere 

https://www.tp-link.com/us/support/faq/2568/

https://www.tp-link.com/us/support/faq/2435/

er605 designed max speed is around 900Mbps.

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#4
Options
Re:EAP245 & ER605 slow throughput?
2022-01-13 10:54:50

@Tedd404 

 

Thanks for this!

 

Does this mean that on my LAN I'm limited to 900mbps bandwidth, or just the connection to the WAN?

 

 

  0  
  0  
#5
Options
Re:EAP245 & ER605 slow throughput?
2022-01-18 14:41:10

@MilesIsHere 

NAT throughput, basically, you can take it as your bandwidth for Internet speed. The whole bandwidth for NAT. Private IP to Public IP, bandwidth is 900Mpbs+. 

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 2614

Replies: 5

Related Articles
ER605 Slow IPv6 Throughput
1717 0
EAP245 slow wifi connection questoin
1402 0
Slow wifi EAP245
2255 0
Extremly slow Vpn throughput on ER605
2702 0
EAP245 WiFi Download Slow
656 0
EAP245 slow upload speed
2074 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.