Cannot access client devices behind 605 even though I opened the port(s)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have a cable modem connected to the WAN port of my IPfire firewall (192.168.10.1) a static route to the wan on the 605 (192.168.10.2) yes it its double nat..currently everything works and all clients can get on line, the problem is when I VPN into the network using the IPfire (giving me a VPN IP of 10.10.10.x) I cannot access the client devices behind the 605, is there a trick to allow incoming connections to get behind the 605? One more note, if I ssh into the firewall I can only ping (10.2 the wan of the 605) but nothing else behind it on the which is the 192.168.0.x natted subnet. BUT I can ping out to the internet from inside the network (192.168.0.x) out of the 605..
so I can ping out but not in...
sorry for the long post..thanks team.
(cablemodem)>>IPFIRE firewall>>>R605>>>TL-SG2428P v1.0>>>network
