Guest WiFi
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
To accomplish a Guest WiFi with VLAN segregation and client isolation with the devices below:
I have setup a Guest Wifi over vlan 2 tagged for that wifi and a ACL and route in the Fortigate to allow access from any network to Personell network and Ip of OC200:80.
Should that do it?
Omada Controller Firwamre: 4.4.4 on VLAN 1
EAP225-Outdoor Firmware: 5.0.5 on VLAN1:U and VLAN 2:T
EAP620 HD on Firmware 1.0.4 on VLAN 1:U and VLAN 2:T
I have two different WiFi networks over all the APs:
Guest: VLAN2, No Authentication, Guest Network: Enabled, Portal with no authentication and promotional URL forwarding.
Personell: VLAN1
Wireless Network:
Portal:
VLAN1: Untagged, VLAN2: Tagged
Profile:VLAN1u Vlan2Guest T = VLAN1: Untagged, VLAN2: Tagged
@Tescophil
I did use port 80 and it still works with guest portal that need the controller online. Wierd.
The controller have these settings:
@Virgo
They did after i setup a route on the Fortigate and specificed the Controller as an firewall object that traffic is allowed from Guest Network (separate subnet and VLAN) to Controller ip (separate subnet and VLAN) over specified port 80.