For the 3rd time my R605 is showing as ADOPT FAILED on my OC200 controller.

It happened after I need to move some devices in my desk and so I had to power off everything, unplug all cables, move to another room, plug all cables and power on everything.

So, something that can happen with anyone.

It started back, the controller, my 2x EAPs and I was able to use the internet normally. No further changes.

When I logged in omada page I was able to connect to the OC200 but noted that Gateway was listed as 0 and the ADOPT FAILED at the R605.

If I ask to adopt again, it asks for the username and password and I use what's stored in the browser and also double checked in my password safe but it fails.

The username/password is the same of the OC200 as the EAPs uses the same set of credentials.

So now I can use my network but cannot manage the R605.

Dont know why it happened in any of the previous times but the 1st time I thought that was something on my end and forced the adoption that resulted on having to reset it completelly and lost all config from OC200. The 2nd time I was in the middle of an emmergency and had no time to think or to call support and had to do it manually from scratch again.

Now I really need to solve this and get a decent solution.

Buy a HW controller that helps me on nothing is clearlly not what I want.