Business Community > All Threads > Can I configure EAP mesh without controller?
< All Threads

Can I configure EAP mesh without controller?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can I configure EAP mesh without controller?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can I configure EAP mesh without controller?
Can I configure EAP mesh without controller?
2021-08-02 03:52:33 - last edited 2021-08-03 05:00:31
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 5.0.0

Hi,

I have a one question. 

~

[my hardware]

EAP225-outdoor x2

PC(windows) with OmadaControll software(ver4.4.3)

[question]

First, I success configure site by these hardware. And mesh working perfectly. Second, I tried to remove OmadaController(PC) from site, but EAP225-outdoor wifi function shutoff after 1minute from power on. And side of led lamp of EAP225-outdoor is blink cyclic about 5 second.
I want to use EAP225-outdoor x2 within site(1SSID, with mesh function)  without OmadaController(without software and hardware controller).


Does anyone know how  to configure this?

~

thanks,

 

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Can I configure EAP mesh without controller?-Solution
2021-08-02 08:56:49 - last edited 2021-08-03 05:00:31

@EMYH 

 

Short answer: NO

 

EAP Mesh/fast roaming are advanced features that require Omada Controller(OC200 or software). You won't be able to use that without one.

 

That's a wireless connection. EAP Mesh is the wireless bridge. 

FAQ about EAP mesh: https://www.tp-link.com/en/support/faq/2949/

Q1: https://www.tp-link.com/us/support/faq/2283/

Recommended Solution
  4  
  4  
#2
Options
2 Reply
Re:Can I configure EAP mesh without controller?-Solution
2021-08-02 08:56:49 - last edited 2021-08-03 05:00:31

@EMYH 

 

Short answer: NO

 

EAP Mesh/fast roaming are advanced features that require Omada Controller(OC200 or software). You won't be able to use that without one.

 

That's a wireless connection. EAP Mesh is the wireless bridge. 

FAQ about EAP mesh: https://www.tp-link.com/en/support/faq/2949/

Q1: https://www.tp-link.com/us/support/faq/2283/

Recommended Solution
  4  
  4  
#2
Options
Re:Can I configure EAP mesh without controller?
2021-08-03 05:00:20

@Yannie 

Yannie wrote

@EMYH 

 

Short answer: NO

 

EAP Mesh/fast roaming are advanced features that require Omada Controller(OC200 or software). You won't be able to use that without one.

 

That's a wireless connection. EAP Mesh is the wireless bridge. 

FAQ about EAP mesh: https://www.tp-link.com/en/support/faq/2949/

Q1: https://www.tp-link.com/us/support/faq/2283/

Thank you in your advice.
I found information from your link. I will think twice how to configure our site.
Best regards,

  1  
  1  
#3
Options

Information

Helpful: 1

Views: 10747

Replies: 2

Related Articles
Mesh connection configuration questions
1746 0
2x EAP AP, with or without controller?
19058 1
EAP225 Outdoor configuration without lan connection
697 0
Mesh configuration-/downlinking APs
1143 0
INCOMPATIBLE - CONFIGURATION RESULT for all my EAP
964 0
{Help Needed} Migrating from Software Controller to Hardware Controller without config file
700 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.