New branch site wont route vlans

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

New branch site wont route vlans

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
New branch site wont route vlans
New branch site wont route vlans
2021-06-25 05:28:42
Hardware Version: V3
Firmware Version: 3.0.5 Build 20200110

I have a new site I'm setting up with an ISP supplied router.  The site is on our private WAN and 10.10.40.0/21 is being routed to this site.

VLAN1 10.10.40.0/24 gateway 10.10.40.2 (the isp router is 10.10.40.1) 

VLAN2 10.10.41.0/24 gateway 10.10.41.1

VLAN3 10.10.42.0/24 gateway 10.10.42.1

etc

Problem is I can't get anything to route to the WAN other than VLAN1.

Also

All VLANs need to talk to VLAN2 where the local shared resources are.

 

Here is the system config

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.06.25 10:22:56 =~=~=~=~=~=~=~=~=~=~=~=
T1600G-28PS#sho running-config 
!T1600G-28PS
#
vlan 2
 name "Production"
#
vlan 3
 name "VoIP"
#
vlan 4
 name "Security"
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
location "xxxxxxxx"
contact-info "David xxxxxxx"
#
#
system-time ntp UTC+10:00 192.168.236.30 192.168.230.10 12
no system-time dst
#
#
#
user name admin privilege admin secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
no service reset-disable
#
#
#
#
#
#
#
#
ip ssh server 
#
gvrp
#
#
#
ip route 0.0.0.0 0.0.0.0 10.10.40.1 25
#
#
#
power inline consumption 192.0
#

#
#
#
#
#
#
interface vlan 1
  ip address 10.10.40.2 255.255.255.0
  description "Management GW"
  ipv6 enable
#
interface vlan 2
  ip address 10.10.41.1 255.255.255.0
  description "Production GW"
  no ipv6 enable
#
interface vlan 3
  ip address 10.10.42.1 255.255.255.0
  description "VoIP GW"
  no ipv6 enable
#
interface vlan 4
  ip address 10.10.43.1 255.255.255.0
  description "Security GW"
  no ipv6 enable
#
interface gigabitEthernet 1/0/1
  switchport general allowed vlan 2 untagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/2
  switchport general allowed vlan 2 untagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/3
  switchport general allowed vlan 2 untagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/4
  switchport general allowed vlan 2 untagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/5
  switchport general allowed vlan 2 untagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/6
  switchport general allowed vlan 2 untagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/7
  switchport general allowed vlan 2 untagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/8
  switchport general allowed vlan 2 untagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/9
  switchport general allowed vlan 2 untagged
  switchport general allowed vlan 3 tagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/10
  switchport general allowed vlan 2 untagged
  switchport general allowed vlan 3 tagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/11
  switchport general allowed vlan 2 untagged
  switchport general allowed vlan 3 tagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/12
  switchport general allowed vlan 2 untagged
  switchport general allowed vlan 3 tagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/13
  switchport general allowed vlan 2 untagged
  switchport general allowed vlan 3 tagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/14
  switchport general allowed vlan 2 untagged
  switchport general allowed vlan 3 tagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/15
  switchport general allowed vlan 2 untagged
  switchport general allowed vlan 3 tagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/16
  switchport general allowed vlan 2 untagged
  switchport general allowed vlan 3 tagged
  switchport pvid 2
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/17
  switchport general allowed vlan 4 untagged
  switchport pvid 161
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/18
  switchport general allowed vlan 4 untagged
  switchport pvid 161
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/19
  switchport general allowed vlan 4 untagged
  switchport pvid 161
  no switchport general allowed vlan 1
  
#
interface gigabitEthernet 1/0/20
  
#
interface gigabitEthernet 1/0/21
  
#
interface gigabitEthernet 1/0/22
  
#
interface gigabitEthernet 1/0/23
  
#
interface gigabitEthernet 1/0/24
  
#
interface gigabitEthernet 1/0/25
  
#
interface gigabitEthernet 1/0/26
  
#
interface gigabitEthernet 1/0/27
  
#
interface gigabitEthernet 1/0/28
  
#
end

T1600G-28PS#

 

 

Any suggestions appreciated

  0      
  0      
#1
Options
1 Reply
Re:New branch site wont route vlans
2021-06-25 07:31:37

@Buckleau 

 

According to this FAQ, you have to set something(Multi-Nets NAT and Static Routing) on your Router to make other subnets have internet.

How to build up a multi-nets network via Multi-Nets NAT feature on TP-Link router with L2+/L3 switches?

Just striving to develop myself while helping others.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 529

Replies: 1

Related Articles