Move from software controller to hardware controller
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I have 1 EAP245v3 and 1 switch TL-SG2210P already adopted in the Omada Software Controller installed on my desktop.
I have installed the OC200, configured it for cloud access, both controllers show in my tp-link cloud and my question is how do I move the devices from the software controller to the hardware controller.
Omada software controller was a little buggy for me, it sometimes showed disconnected devices when I would start it, partially resolved it when I have reinstalled and I wanted a good solution while waiting for the 2nd ap to come back from the warranty service.
For now I just want to move the devices and configure the OC200.
bonus question: if I enable logs with the hardware controller, a single 8gb usb stick formatted with fat32 will suffice?
Thank you.
@Philbert Could you please tell me if theese settings are correct in order to save Clients' History Data?
and 
I get the warning that the hystorical data of the clients will occupy all the internal memory of the OC200 and I obviously do not want that.
PS: I have moved the devices by forgetting them on the software controller first and adopting them in hardware controller.
