Client can not connect to rap225 obtaining IP adress

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Client can not connect to rap225 obtaining IP adress

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Client can not connect to rap225 obtaining IP adress
Client can not connect to rap225 obtaining IP adress
2021-02-05 06:21:08 - last edited 2021-03-01 23:02:51
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 5.0.0

Please help guys.

I'm using Omada software controller. recently clients can not connect to the EAP225 outdoor it says obtaining IP address, why?

Any suggestions?

  0      
  0      
#1
Options
2 Accepted Solutions
Re:Client can not connect to rap225 obtaining IP adress-Solution
2021-02-13 08:58:48 - last edited 2021-03-01 23:04:57

Dear @Ser,

 

Ensure the EAP is hardwired to the main router and your router works properly.

 

Here is a FAQ for your reference: Common questions about TP-Link EAP device when it’s used in home network

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
Re:Client can not connect to rap225 obtaining IP adress-Solution
2021-02-22 06:02:04 - last edited 2021-03-01 23:02:51

Dear @Ser,

 

yes, thank you so. Problem solved

 

Thank you for sharing the results. Glad to know that the problem was resolved finally.

 

Hope you enjoy the Internet with the TP-Link products. Cheers!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#6
Options
5 Reply
Re:Client can not connect to rap225 obtaining IP adress-Solution
2021-02-13 08:58:48 - last edited 2021-03-01 23:04:57

Dear @Ser,

 

Ensure the EAP is hardwired to the main router and your router works properly.

 

Here is a FAQ for your reference: Common questions about TP-Link EAP device when it’s used in home network

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
Re:Client can not connect to rap225 obtaining IP adress
2021-02-13 14:17:04 - last edited 2021-02-13 14:27:37

@Fae thank you so much...

Yes it's connected to the main router, I tried to connect it to TL-R605 but it's disconnected, please advice.

  0  
  0  
#3
Options
Re:Client can not connect to rap225 obtaining IP adress
2021-02-18 10:11:18

Dear @Ser,

 

Yes it's connected to the main router, I tried to connect it to TL-R605 but it's disconnected, please advice.

 

What do you mean that it's disconnected when you tried to connect the EAP to TL-R605?

 

 

If clients connected to the EAP SSID cannot obtain an IP address, please ensure the cable connection from EAP to the main router is recognized by the router, try a different cable and port for checking, you may access the router page to check if the router sees the EAP.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:Client can not connect to rap225 obtaining IP adress
2021-02-20 23:13:10

@Fae  yes, thank you so. Problem solved

  0  
  0  
#5
Options
Re:Client can not connect to rap225 obtaining IP adress-Solution
2021-02-22 06:02:04 - last edited 2021-03-01 23:02:51

Dear @Ser,

 

yes, thank you so. Problem solved

 

Thank you for sharing the results. Glad to know that the problem was resolved finally.

 

Hope you enjoy the Internet with the TP-Link products. Cheers!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#6
Options

Information

Helpful: 0

Views: 2393

Replies: 5

Related Articles