Business Community > All Threads > Ping problem on 2 switch TL-SG108E
< All Threads

Ping problem on 2 switch TL-SG108E

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Ping problem on 2 switch TL-SG108E

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Ping problem on 2 switch TL-SG108E
Ping problem on 2 switch TL-SG108E
2021-02-01 21:05:31
Model: TL-SG108E  
Hardware Version: V5
Firmware Version: 1.0.0 Build 20191021 Rel.53360

hello I have for a few days network losses on 2 TL-SG108E switches. Both are connected to a T2600G-28TS 4.0
On the port which serves as a link between these 2 devices, I noticed that the green and orange LEDs were flashing. Any idea on the problem? 

  0      
 
  0      
 
#1
Options
2 Reply
Re:Ping problem on 2 switch TL-SG108E
2021-02-01 21:16:19

I have disabled Loop Prevention. If the system detects a loop, it blocks the port.
So I imagine that there is a loop.

  0  
  0  
#2
Options
Re:Ping problem on 2 switch TL-SG108E
2021-02-01 21:27:17

I think I have found but I want an opinion. So far I had 2 google wifi in mesh mode. I decided to connect the second google wifi to the lan. I have the impression that in addition to the lan, it still communicates in mesh and therefore there may be a loop. How to make sure and how to remove this mesh mode?

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1130

Replies: 2

Related Articles
Sonos latency problems with TL-SG108E switch
1582 0
TL-SG108E x 2 and Vlan
287 0
Problem ping switch TL-SG2210P
437 0
Gigabit switch TL-SG108E V6 losing gigabit connection
1080 0
TL-SG108E with OPNSense VLAN.
3087 0
TL-SG108E access ports on same vlan cannot ping each other
710 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.