Business Community > All Threads > TL-ER604W Can disable bandwidth control
< All Threads

TL-ER604W Can disable bandwidth control

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-ER604W Can disable bandwidth control

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER604W Can disable bandwidth control
TL-ER604W Can disable bandwidth control
2020-11-21 02:01:19 - last edited 2021-04-18 10:27:34
Model: TL-ER6020  
Hardware Version: V2
Firmware Version: 1.2.0 Build 20160825 Rel.45884s

 

TL-ER604W

 

Hardware Vesion TL-ER604W v2.0

 

1.2.0 Build 20160825 Rel.45884s

 

 

 

I have a 50Mbps down 20Mbps up cable connection.

 

This router does not allow me to set the upstream or downstream bandwidth beyond 1,000,000 Kbps on the WAN1 panel which should be plenty.

 

I have the "Disable Bandwidth Control" radio button selected.

 

I do a speed test and I get around 8Mbps.

 

if I set the Down Stream bandwidth on the WAN1 panel to 500,000 (half the max) and run a speed test I get around 4Mbps...  half the speed at 1,000,000 Kbps. ..

 

What am I missing?  Is there some setting I am not seeing.

 

Any help would be appricated. 

 

 

 

   

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TL-ER604W Can disable bandwidth control-Solution
2020-12-15 14:02:36 - last edited 2021-04-18 10:27:34

@Fae IT is because I am bad at MATH!!!! the problem was the switch.....  Thanks!

 

-Mark

Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:TL-ER604W Can disable bandwidth control
2020-11-26 11:55:37 - last edited 2021-04-18 10:27:34

Dear @mcg1103,

 

This router does not allow me to set the upstream or downstream bandwidth beyond 1,000,000 Kbps on the WAN1 panel which should be plenty.

 

1,000,000 Kbps ≈ 1000Mbps (1M=1024Kbps). I don't know why you need to set the bandwidth beyond 1000Mbps on the WAN.

 

If your ISP provides 50Mbps down 20Mbps up bandwidth, then the upstream/downstream bandwidth can be set 20480Kbps/ 51200Kbps.

 

For the LOW speed issue, you may reset the router to default settings for checking if the router has been working fine before.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#2
Options
Re:TL-ER604W Can disable bandwidth control-Solution
2020-12-15 14:02:36 - last edited 2021-04-18 10:27:34

@Fae IT is because I am bad at MATH!!!! the problem was the switch.....  Thanks!

 

-Mark

Recommended Solution
  0  
  0  
#3
Options
Re:TL-ER604W Can disable bandwidth control
2020-12-16 07:57:40 - last edited 2021-04-18 10:27:34

Dear @mcg1103,

 

IT is because I am bad at MATH!!!! the problem was the switch.....  Thanks!

 

 

Welcome and thank you for getting back to the Community with the results. Have fun with the TP-Link router!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 950

Replies: 3

Related Articles
tl-er604w wan1 and wan2 disabled
904 0
How to disable remote management in TL-ER604W
938 1
TL-ER604W Not getting full ISP bandwidth
952 0
TL-SG108E Bandwidth Control
372 0
TL-SG108E Bandwidth Control
3001 0
Tl-er604w
712 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.