Hey guys,

I am setting up a wireless hog trap.

I am using two CPE210s to provide internet from the house 0.3miles away from trap location in the woods.

I will be doing my best to get the CPE210s above the tree line.

On the trap side, there will be a wifi camera and a wifi relay.  I will need the CPE on that receiving side to also be providing a wifi network to these devices.  I am hoping connection strength is decent enough down at the ground level even with the CPE 15ft or so up in the air.

My main question is what operation mode should I choose for both the sending unit and the receiving unit given my requirements?