Multiple CPE210s in a Daisy Chain
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Greetings,
I've been stuck for two days and hope the community can help. I need to beam a wifi signal in the shape of an "L" around a large obstacle and have four CPE210s to work with.
At the top end is a CPE210 (call it "A") in Access Point mode with an Ethernet cable connected from its LAN port to a router.
At the bottom end is a CPE210 (call it "D") with its LAN port connected to a POE switch to which a 4K security camera is also connected.
In the middle where the signal needs to turn 90 degrees to get around the obstacle are two CPE210s (call them "B" and "C") that are close enough together that their LAN ports can be connected via a short Ethernet cable (in other words, they're on the same pole).
What is the best configuration/mode for each CPE210?
How would the answer differ if I wanted CPE210 "D" (at the bottom closest to the camera) to also rebroadcast its wifi signal so that other wireless devices could connect to it? Would doing this compromise the throughput?
THANK YOU in advance. I'm sure the answers are straightforward, but I'm just not able to lock them in.
