Business Community > All Threads > Map EAP implantation gives error message with parameters:
< All Threads

Map EAP implantation gives error message with parameters:

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Map EAP implantation gives error message with parameters:

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Map EAP implantation gives error message with parameters:
Map EAP implantation gives error message with parameters:
2020-08-16 18:12:36 - last edited 2020-11-19 01:58:08
Model: OC200  
Hardware Version: V1
Firmware Version: 1.7.0 Build 20200703 Rel.59609


 

 

 With version 1.2.3 this worked fine.  Furthermore, there is also no coverage map for the EAPs as in version 1.2.3

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re: Map EAP implantation gives error message with parameters:-Solution
2020-11-19 01:58:00 - last edited 2020-11-19 01:59:42

Hi All,

 

The Omada Controller V4.2.4 has been released, which fixes the problem discussed in this post.

 

Here is the download link for the controller V4.2.4.

 

Software Controller: https://www.tp-link.com/en/support/download/omada-software-controller/#Controller_Software

Hardware Controller OC200: https://www.tp-link.com/en/support/download/oc200/#Firmware

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re: Map EAP implantation gives error message with parameters:
2020-08-17 00:47:48

Dear @TQJ5300,

 

Are you adding the Map via omada.tplinkcloud.com? If so, please try it from local access instead.

 

The Omada Controller 4.1.5 is unable to add the Map from cloud access at present, the R&D will fix it in the next version.

 

Best Regards!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re: Map EAP implantation gives error message with parameters:
2020-08-17 07:15:59

@Fae 

 

Thanks, locally I can load the Eap map, but coverage map is not provided.

 

Best Regards!

  1  
  1  
#3
Options
Re: Map EAP implantation gives error message with parameters:
2020-11-18 22:49:30

@TQJ5300 i have the same problem

TQJ5300 wrote


 

 

 With version 1.2.3 this worked fine.  Furthermore, there is also no coverage map for the EAPs as in version 1.2.3

 

  0  
  0  
#4
Options
Re: Map EAP implantation gives error message with parameters:-Solution
2020-11-19 01:58:00 - last edited 2020-11-19 01:59:42

Hi All,

 

The Omada Controller V4.2.4 has been released, which fixes the problem discussed in this post.

 

Here is the download link for the controller V4.2.4.

 

Software Controller: https://www.tp-link.com/en/support/download/omada-software-controller/#Controller_Software

Hardware Controller OC200: https://www.tp-link.com/en/support/download/oc200/#Firmware

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1368

Replies: 4

Related Articles
EAP 610 Gives DNS that are not correct
498 0
Captive portal redirects to http://192.168.0.65:8088/login and gives error
1448 0
Threat Management Map
602 0
Threat Management Map?
3137 1
Omada Controller (OC200) and TL-SG2218v1.0 Smart Switch MAP Client Group Error
2339 0
Omada gives General Error when finishing Omada Setup Wizard
3980 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.