How to config Lan-to-Lan and resove WAN1: IKE negotiation began in initiator mode.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to config Lan-to-Lan and resove WAN1: IKE negotiation began in initiator mode.
Hi,
i config.
Router_1 = TP-R600VPN
Router2 : SEL3620
| ID | Time | Module | Level | Content |
|---|
| 1 | 2020-06-05 17:53:10 | IPsec | NOTICE | WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5) |
| 2 | 2020-06-05 17:51:37 | IPsec | NOTICE | WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5) |
| 3 | 2020-06-05 17:50:05 | IPsec | NOTICE | WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5) |
| 4 | 2020-06-05 17:48:33 | IPsec | NOTICE | WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5) |
| 5 | 2020-06-05 17:47:00 | IPsec | NOTICE | WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5) |
| 6 | 2020-06-05 17:46:02 | IPsec | NOTICE | WAN1: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=10.132.1.221<->10.132.1.5) |
| 7 | 2020-06-05 17:45:28 | IPsec | NOTICE | WAN1: IKE negotiation began in initiator mode. (Mode=Aggressive Mode, Peers=10.132.1.221<->10.132.1.5) |
