You need to configure your device, please follow the steps below. I use windows and I am not farmiliar with MAC, so please have a look and see how you can replace the windows instructions of setting up you PC You to "Statically" configure the PC so as to put it in the same subnet as the CPE so that you can connect to the CPE 1. The PC must for example be configured with IPv4 add 192.168.0.10 and mask it with 255.255.255.0 2. Open your browser (they are recommending “Chrome’, FireFox or Safari” 3. On the browser address enter 192.168.0.254 ( CPEs default IP add) 4. Default username = admin and password = admin 5. Please change this and input your own secure username and password 6. Go to “Quick setup” tab 7. Here, you will see all the options, you need to select “Repeater” mode for the application that you want 8. Click next until you get to finish 9. Go to “Wireless” tab 10. Under “Wireless Client Settings” click survey to scan available “Wi-Fi” networks 11. Select the SSID you want to extend to your garden, for example my one is shown below 12. So select your SSID, fill in its MAC add, and put in your SSID password under the PSK Password field 13. Click “Apply” and you are good to go