Hi, I am setting up a home office. My current consumer WiFi router is not giving me enough coverage. I want to try setting up a network with Omada.

The fibre termination point is in the living room which also doubles as a home office. I would like a separate wifi access point and lan connectivity in the bedroom. There is no ethernet in the home but a functioning MoCA bridge between the fibre termination point (living room) and the bedroom. My ISP provided a fibre modem (Nokia). That is the extent of what I have on hand right now.

I in intend on buying:

• 2 x TL-SG108E
• 2 x EAP225
• 1 x OC200

Proposed setup below

Nokia Modem -> TL-SG108E (first device in liiving room)

TL-SG108E (first device in liiving room) -> OC200

TL-SG108E (first device in liiving room) -> MoCA bridge

TL-SG108E (first device in liiving room) -> EAP225 (first device)

MoCA bridge - TL-SG108E (second device in bedroom)

TL-SG108E (second device in bedroom) -> EAP225 (second device)

My questions are:

1. Will this work?
2. Do I need a "router" or "gateway" etc to be connected to the modem first or is the managed switch ok?
3. Does the above do proper wifi roaming / handoff like 802.11 r / k / v ?

Thanks in advance for your help.