Hello,

 

@TheWifiNoob You want to use two EAP225-Outdoors to deploy the mesh network. For how to deploy mesh network, there are two ways to do this.

 

The first way:

1) Download the latest Omada Controller from the website and install it on a PC.

2) Connect and Adopt one EAP with Controller.

3) Find AP with pending (wireless) status.

4) Adopt the AP.

5) Wait for the AP's status change from Pending (wireless) to Connected (wireless).

 

The second way:

1) Install the Omada Controller.

2) Connect all EAP devices and Controller together.

3) Adopt all EAP devices with Controller.

4) Remove wired connection of theAP you want to deploy wireless (Mesh AP).

5) Configure uplink for isolated AP.

6) Wait for the isolated AP's status change from Isolated to Connected (Wireless).

Thank you Forrest for your answer.

 

I have logged in to each EAP via his IP address.

Each EAP has now is own SSID and Password

 

Both are currently connected via LAN

 

I have also 1 account for the Omada Controller v3.1.13

 

When I launch the controller i do not see any EAPs

 

What do I need to do to see them in the Omada Controller?

 

 

Hi @TheWifiNoob 

 

You say you manage these two EAPs in standalone mode. But you also say you cannot find the EAPs in the Controller.

I am confused with your question. If you want to deploy the mesh network, you shouldn't manage the EAP in standalone mode. You should connect your Controller host and the EAPs to a switch or a router. You can try to ping these EAPs in the Controller host to check if you can ping them successfully. 

Hope this can help you.

Thank you very much Forrest for your help. It finally works The reason I was unable to see the AP in the controller was the Windows Firewall. I had to de activate it and that’s it Your option 2 was the best way for me. Thank you

Am I lost or am I lost.

 

 

 

I've been having problems with my 2 EAP225 outdoor units since I set them up.   In one of these posts the person said he renamed each AP with its own SSID?  Now sure how or if that will work ??

 

 

thanks in advance,

 

 

Chris K.

Where is the "configure uplink for isolated AP." on EAP-225 Outdoor??

 

forrest wrote

Hello,

 

@TheWifiNoob You want to use two EAP225-Outdoors to deploy the mesh network. For how to deploy mesh network, there are two ways to do this.

 

The first way:

1) Download the latest Omada Controller from the website and install it on a PC.

2) Connect and Adopt one EAP with Controller.

3) Find AP with pending (wireless) status.

4) Adopt the AP.

5) Wait for the AP's status change from Pending (wireless) to Connected (wireless).

 

The second way:

1) Install the Omada Controller.

2) Connect all EAP devices and Controller together.

3) Adopt all EAP devices with Controller.

4) Remove wired connection of theAP you want to deploy wireless (Mesh AP).

5) Configure uplink for isolated AP.

6) Wait for the isolated AP's status change from Isolated to Connected (Wireless).

Hi dear bro,

Now What eap devices can be meshed?

 

 How far can be placed Eap225 v3 and eap225 outdoor? 

 

I want to give wifi in 6 flats including 2 room. 1 flat is 20'x20'. So How many eap devices mus be used? I only set up wirelessly without wired. @forrest