CPE210 Client Mode and Archer C50

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE210 Client Mode and Archer C50

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
CPE210 Client Mode and Archer C50
CPE210 Client Mode and Archer C50
2019-04-12 21:11:48 - last edited 2019-04-14 14:31:20
Model: CPE210  
Hardware Version: V1
Firmware Version: 2.1.11
Model: CPE210
Hardware Version: V1
Firmware Version: default?

I Live in a Camper in a Trailerpark, We only have wireless avilable to us but on account of living in a metal box and this being a rathr large trailer park were unable to get a decent or consant signal. I have the CPE210 In Clinet mode with an ethernet port hooked up to the archer C50's Internet port. Im currently using client mode. Is it possible for my Internal network (Archer) to recive Internet from the CPE210 this way?

 

Wireless internet X.X.1.0

Interneal Network X.X.0.0

CPE IP X.X.0.101

 

Im having issues as Can nconnect the CPE to the wireless network but im not able to get internet on any device on the archer.

  0      
  0      
#1
Options
1 Reply
Re: CPE210 Client Mode and Archer C50
2019-04-14 20:05:19

CPE210 in Client mode needs to be in the same subnet as the AP of the wireless hotspot (X.X.1.0). If the Archer is used as a router, it needs to be in this same subnet on its WAN side, too. If it is used as an AP, it needs to be in the same subnet on its LAN side, DHCP and routing disabled.

 

If you want to use a private network (X.X.0.0) for the CPE and the Archer, you need to switch the CPE to AP Client Router mode. See »Operation Modes« in the Pharos User's Guide for more information.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 991

Replies: 1

Related Articles