Hi,

For your issue, there are some suggestions you can refer to.

1. Delete the SSID of 2.4G and reconfig it again, then check if the problem still exists.

2. Make sure that don't select channel 12 and channel 13, becasue some client devices don't support these two channels.

3. You said when you changed the channel, the SSID will reappear again, so I think it may be related with the wireless environment. You can use wifi analyzer and scan the wireless environment, and then choose the channel that is less used.

4. When did the problem occur? Did it occur since you upgrade the latest firmware or it just occurred recently? If it occurs since you upgraded the firmware, I think you can upgrade the firmware again.

Hi cbq!

1. Already did a reset and reconfigured it, but no luck.

2. First I was using Auto, now I fixed on channel 1 and sometimes on 6.

3. Do you recommend any wifi analyzer?

4. From the beginning, but only now that we are using more the AP. The problem occurred before and after the upgrade.

Thanks!

Hi Luciano,

1. There is an APP names WiFiAnalyzer, you can install it on your phone and scan the wireless environment. 

2. You can configure the channel width as 20MHz to diminish the interfere.

3. You say you havd a reset, do you mean that you have a factory reset for this EAP220?

4. If it is convenient for you, please upgrade the firmware again to have a try. I think there may be somthing wrong when you upgrade the firmware.

forrest wrote

Hi Luciano,

 

1. There is an APP names WiFiAnalyzer, you can install it on your phone and scan the wireless environment. 

2. You can configure the channel width as 20MHz to diminish the interfere.

3. You say you havd a reset, do you mean that you have a factory reset for this EAP220?

4. If it is convenient for you, please upgrade the firmware again to have a try. I think there may be somthing wrong when you upgrade the firmware.

 

Hi forrest,

1 . I will try it, tks!

2 . Already did that.

3. Yes, it was a factory reset.

4 . I will reinstall the firmware later and try again.

Thanks!