BUILDMEIT wrote

Good Evening,

 

I have a TL-ER5120 v2.0 (1.0.8 Build 20140212 Rel.36037) Broadband Load Balencer and three fibre connections (all 80Mb Down and 18Up).

 

All three lines are up and working however when I do a speed test I am only getting about 139Mb DOWN and 38 UP.

 

Note: this is with the " Enable Application Optimized Routing" and " Enable Bandwidth Based Balance Routing" unchecked.

 

If I test the line one by one I can get about 70Mb DOWN and 18UP on each of the times no problems, am I hitting a limitation with this device?

Hi BUILDMEIT

If we use multiple WAN ports, we shuold use P2P download software like utorrent to test the speed. Because we need the data to pass different WAN ports. But still cannot make sure be able to get the full speed. Because the data will pass the different WAN ports randomly.

If we use the website like speedtest to test the speed, most data will go thorugh only one WAN ports, because the data belong to only one session. Then we will get the low speed.