TL-ER5120 , DHCP expand

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-ER5120 , DHCP expand

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER5120 , DHCP expand
TL-ER5120 , DHCP expand
2018-06-11 19:02:27 - last edited 2021-08-21 06:05:18
Model :

Hardware Version :

Firmware Version :

ISP :

Hey guys,

I am really new in TPLink and business router, so please have mercy.

We have a TL-ER510 and in in the configs.
Network -> LAN -> DHCP we have a range from 192.168.5.1 - 192.168.5.253 (default Gateway: 192.168.5.254).

Is it possible to expand the range like: 192.168.5.1 - 192.168. 7.253 (default Gateway: 192.168. 7.254),

Or what would be the correct way?

Thanks, zesa
  0      
  0      
#1
Options
3 Reply
Re:TL-ER5120 , DHCP expand
2018-06-15 10:06:57 - last edited 2021-08-21 06:05:18
It cannot set the IP range to 192.168.5.1- 192.168.7.253. It has contained different subnets.
If you need to configure multiple subnets, you need a router which support multiple DHCP server. I think TL-ER5120 doesn't support this.
  0  
  0  
#2
Options
Re:TL-ER5120 , DHCP expand
2018-06-15 18:48:26 - last edited 2021-08-21 06:05:18
Yes, it doesnt support the feature :(
So if I have more than 254 clients / printers / e.g. , I must to buy a new router, right?
  0  
  0  
#3
Options
Re:TL-ER5120 , DHCP expand
2018-06-20 16:43:59 - last edited 2021-08-21 06:05:18
As I know, ER5120_V3 supports up to 300 clients.
You can set up the static IP address or use other DHCP servers for other clients. Because they are in the different subnets, you need to configure the feature of multi-nets NAT and static routing.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1803

Replies: 3

Related Articles