Business Community > All Threads > Creating one SSID with multiple EAP 110
< All Threads

Creating one SSID with multiple EAP 110

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Creating one SSID with multiple EAP 110

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Creating one SSID with multiple EAP 110
Creating one SSID with multiple EAP 110
2018-02-05 05:05:19
Model :

Hardware Version :

Firmware Version :

ISP :

I have always used a single EAP110 just as an extra AP but the main WiFi router and the EAP110 had different SSID's and we switched between the two dependent which area of the house we were in. I am now putting in two more EAP110's to complete coverage in the house and the garden (which has an outbuilding office at the end of it).

My query is 'how do I configure the 3x EAP110's to host the same SSID as the ISP's WiFi router?'

Am using EAP Controller Version: 2.4.7

TIA

Ian
  0      
 
  0      
 
#1
Options
5 Reply
Re:Creating one SSID with multiple EAP 110
2018-02-06 00:41:27
Just set the SSID in the Wireless menu of the EAP Controller. Make sure to use different WiFi channels on each EAP110. Distance between channels should be at least 5 channels if using mixed 802.11b/g/n mode or at least 4 if using only 802.11n mode.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:Creating one SSID with multiple EAP 110
2018-02-06 03:57:59

R1D2 wrote

Just set the SSID in the Wireless menu of the EAP Controller. Make sure to use different WiFi channels on each EAP110. Distance between channels should be at least 5 channels if using mixed 802.11b/g/n mode or at least 4 if using only 802.11n mode.


Will certainly try this, how do you maintain that distance between WiFi channels when using more and more AP's?
  0  
  0  
#3
Options
Re:Creating one SSID with multiple EAP 110
2018-02-07 05:52:33

fivedegrees wrote

Will certainly try this, how do you maintain that distance between WiFi channels when using more and more AP's?


By placing them at a certain physical distance and reducing their TX power to reduce their area of coverage. Of course, this requires exact RF measurements to be taken when building such a wireless network.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Re:Creating one SSID with multiple EAP 110
2018-02-07 06:15:21

R1D2 wrote

By placing them at a certain physical distance and reducing their TX power to reduce their area of coverage. Of course, this requires exact RF measurements to be taken when building such a wireless network.
Appreciate your help
  0  
  0  
#5
Options
Re:Creating one SSID with multiple EAP 110
2021-07-07 17:30:17

@R1D2 

 

Hi, old thread I know. But I have been using one EAP110 to cover some rooms, and I want to know if I can add another EAP110 and connect it to my current one, but wirrlessly. It's not feasible to run a cable to the new location. Can the EAP units works together without a wired connection?

 

Thanks!!

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 7423

Replies: 5

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.